This is the latest version of our Venus GPS board; the smallest, most powerful, and most versatile GPS receiver we carry. It'…
The EM-506 GPS receiver from [USGlobalSat](http://www.usglobalsat.com) based on the spectacular SiRF StarIII chipset. This co…
The LS20031 GPS receiver is a complete GPS smart antenna receiver, that includes an embedded antenna and GPS receiver circuit…
Magnet mount antenna for GPS modules operating at 3V. Designed for use with automobiles - the magnet will hold the antenna in…
The GP-635T is a slim GPS receiver with -161dBm tracking sensitivity and only 27 second cold start time. The slim design make…
The smallest, most powerful, and most versatile GPS receiver we carry just got more powerful.The Venus638FLPx is the successo…
Venus638FLPx is a high performance, low cost, single chip GPS module targeting mobile consumer and cellular handset applicati…
The [Copernicus II](http://www.sparkfun.com/products/10922) is a great GPS module from Trimble, but the SMD module prohibits …
The GP-2106 is a small form factor GPS receiver with built-in antenna. Powered by the SiRF Star IV, the module can acquire sa…
Embedded antenna for small, mobile applications. Basic unpackaged antenna with LNA. 5inch cable terminated with standard male…
Our UAV Development Board is back! The UDB5 (UAV Development Board version 5) comes populated with a dsPIC33FJ256 CPU, and th…
Copernicus II is the latest iteration of the popular Copernicus GPS module from Trimble. The Trimble Copernicus II delivers p…
SMA to MMCX Connector. Adapts MMCX jack to a standard SMA bulkhead. This cable interfaces to the GM862 Cellular modules and t…
This is a 1 foot long JST SH communication cable which can be cut and hacked to your needs. Ideal if you have a UAV project w…
**Description**: The LS20031 GPS receiver is a complete 10Hz GPS smart antenna receiver, that includes an embedded antenna an…
Connector cable for the Lassen iQ. Hirose HFL (female) connector to SMA (female) bulkhead connector. This cable is not compat…
The GP-2106 is a really tiny GPS module. It's so small, in fact, that it's almost too small to use. Not only that, but the 1.…
This is a 1.75" long JST SH communication cable which can be cut and hacked to your needs and can even be used as pigtails. T…
Here is a six pin vertical 1.0mm pitch connector. It is useful if you need something very tiny as a connection. These are not…
That is a GPS chip antenna. Itty-bitty! And we were just as surprised when it picked up just as many satellites as the larger…
This 6-conductor ribbon cable mates with the connector on the bottom of the GP-2106 GPS module. **Dimensions:** 70mm Length
This ZIF connector mates with the 6-conductor ribbon cable for the GP-2106 GPS module. Use it to roll your own GP-2106 carrie…
Surface mount vertical 5-pin 1.0mm pitch connector for connecting to the EM-408 interface cable. **Documents:**[EM408-SMDC…
Communication cable, 1 foot in length, that connects with the EM408. The EM408 GPS modules come with a cable. Cable has two a…
Vertical 10 pin SMD connector for the GS406 GPS module. **Documents:** * [GS406 Datasheet](http://www.sparkfun.com/datash…
Horizontal surface mount connector for the EB-85A/FV-M8 GPS receiver. **Documents:**[EB-85A-Connector.pdf](http://www.spar…
The GeoHelix antenna from Sarentel is a one of those really odd looking antennas. Block ceramic antennas have good gain, but …
The GN3S Sampler v3 is a very interesting high-end research device. Co-developed by the [GNSS Lab](http://ccar.colorado.edu/g…