Member #13737

Member Since: January 17, 2007

Country: United States

  • Product DEV-10748 | about 3 years ago

    Your ioio schematic is not complete. Is there a complete schematic available?

  • Product SEN-09801 | about 3 years ago

    I would really like it if the pullup resistors were populated on the board. It would be much easier to depopulate them if unneeded than to try and add the surface mount resistors. I almost destroyed my board trying to put the surface mount resistors on. The schematic shows the resistors on the board.
    Once I got all the resistors and jumpers set, the board worked well!

No public wish lists :(