×

Please see all COVID-19 updates here as some shipments may be delayed due to CDC safety and staffing guidelines. If you have an order or shipping question please refer to our Customer Support page. For technical questions please check out our Forums. Thank you for your continued support.

Pareekshith

Member Since: February 11, 2012

Country: India

  • Thanks Mike.It calculated as LOW fuse=0xFF High fuse=0xDF for no bootloader option.In data sheet its not clearly given. Okay i'll take a chance and load those values :D

  • Can anyone say what are the LOW and HIGH fuse values for Atmega328 to operate at 20MHz WITHOUT bootloader, When I read the fuse from Arduino UNO it showed as LOW FUSE=0xFF HIGH FUSE=0xDE these are the values for supporting bootloader.

  • Can anyone say what are the LOW and HIGH fuse values for Atmega328p to operate at 20MHz WITHOUT bootloader, When I read the fuse from Arduino UNO it showed as LOW FUSE=0xFF HIGH FUSE=0xDE these are the values for supporting bootloader.

No public wish lists :(