Member #334301

Member Since: June 27, 2012

Country: United States

  • Update on my post. I found the data sheet for T5403 with all the addresses of the REGISTERS. Now I’m wondering if I can’t get RAW pressure reading because I have not filled in CALIBRATION registers.

  • I am using a picaxe micro-controller to get barometric pressure from the T5400. I have used I2C for other devices. I just changed slave addr to 0x77, but it didn’t seem to help. I input 2 bytes, but first byte receives all ones, and 2nd byte all zeros.Any ideas?

No public wish lists :(