Illuminated Mask
Contributors:
Gella
Gella 
Arranging Your Circuit
Gather three LEDs (snap off of an LED panel if needed). Use the template as a guide to arrange your components on the felt, securing each piece with a dab of glue on the back to hold it in place. Double check that the (+) ends of the LEDs line up with the (+) tab of the battery holder.
Glue is hard to get a needle through and can interfere with making a strong electrical connection, so try not to get any in the sew tabs.
You can use a pen or marker to draw lines from one LilyPad piece to another to provide a path to follow when you stitch. For an erasable option, try disappearing ink pens or chalk.
