Track My Order
Frequently Asked Questions
International Shipping Info
Send Email
added to your cart!
MIKROE 8800 Retro Click is a compact add-on board that simplifies the control of multiple LEDs.
MIKROE 10x10 RGB Click is a matrix of 100 "intelligent" RGB elements, forming a 10x10 display screen.
MIKROE 8x8 R Click is a 64 LED matrix display Click board™, composed of SMD LEDs organized in 8 rows by 8 columns.
MIKROE 7seg Click is an accessory board in mikroBUS™ form factor.
UVC Light Click board™ includes uses two 0.7W, 275nm LEDs and one green LED that allow users to see approximate area where …
LED Driver 5 Click is a Click board™ capable of driving an array of high-power LEDs with constant current, up to 1.5A.
LED Driver 8 Click is a compact add-on board optimized for dimming and blinking 32 mA RGBA LEDs.
BarGraph 2 Click is a 10-segment bar graph display Click, which uses a high-quality, multicolor bar graph LED display.
Matrix G Click is a mikroBUS™ add-on board with two green 5x7 matrices driven by two MAX7219 8-bit LED Display Drivers.
LED Driver 9 Click is a compact add-on board that simplifies the control of multiple LEDs.
Matrix R Click is a mikroBUS™ add-on board with two red 5x7 matrices driven by two MAX7219 8-bit LED Display Drivers.
MIKROE LED Driver 11 Click is a compact add-on board that simplifies the control of multiple LEDs.
LED driver Click carries the MCP1662 high-voltage step-up voltage driver from Microchip.
AlphaNum G Click is a simple solution for adding 14-segment alphanumeric display to your device.
16x12 G Click carries a 16x12 LED display and the IS31FL3733 matrix driver.
OLED C Click is equipped with the 96x96 high-color OLED display.
OLED B Click is a compact add-on board that lets you add a small but bright and crisp display to your design.
BarGraph Click is a 10-segment bar graph display Click, which uses a high-quality bar graph LED display.
Matrix RGB Click is a mikroBUS™ add-on board powered by a 32-bit FT900 MCU designed specifically for powering 16x32 RGB LED…
BarGraph 3 Click is equipped with a five-segment LED bar graph display, notable for its strong and uniform illumination of th…
LED Driver 4 Click is a form of a high-efficiency boost converter that is ideally suited for driving an array of white LEDs.
LED Driver 14 Click is a compact add-on board that simplifies the control of multiple LEDs.
LED driver 2 Click carries the MCP1643 - LED constant current regulator, made by Microchip.
OLED W Click carries a 96 x 39px white monochrome passive matrix OLED display.
16x9 Click is an array of 144 LEDs, driven by a single IC with relatively low pin count (28).
LED Driver 7 Click is a Click board™ equipped with the LTC3490, single cell 350mA LED driver from Analog Devices.
UT-M 7-SEG R Click carries two SMD ultra thin LED 7-SEG displays and the MAX6969 constant-current LED driver from Analog Devi…
LED Flash Click functions as a high power LED flash, and carries the CAT3224 flash LED driver.
LED Driver 12 Click is a compact add-on board that simplifies the control of multiple LEDs.
UT-L 7-SEG R Click carries two SMD ultra thin LED 7-SEG displays and the MAX6969 constant-current LED driver from Analog Devi…
7-SEG RGB Click carries a full color single 7 segment digit display.
BIG 7-SEG R Click is what you need if you want to add a seven-segment LED display to your project.
MCP1664 Click contains 4 high-power white LEDs.
LED Ring R Click is a mikroBUS™ add-on board with a ring of 32 red LEDs driven by four 8-bit 74HC595 serial-in, parallel-ou…
7x10 B Click is a LED dot matrix display Click, which can be used to display graphics or letters in a very simple and easy wa…
7x10 Y Click is a LED dot matrix display Click, which can be used to display graphics or letters in a very simple and easy wa…
MIKROE LED Driver 10 Click is a compact add-on board that simplifies the control of multiple LEDs.
7-segment LED display is the most commonly used type of display to represent changing numerical values.
AlphaNum Click is a simple solution for adding 14-segment alphanumeric display to your device.
7x10 G Click is a LED dot matrix display Click, which can be used to display graphics or letters in a very simple and easy wa…
7x10 R Click is a LED dot matrix display Click, which can be used to display graphics or letters in a very simple and easy wa…
LED Driver 13 Click is a compact add-on board that simplifies the control of multiple LEDs.
MIKROE LED Driver 3 Click is an RGB LED driver, capable of driving RGB LEDs with up to 30mA per segment, via the digital I2C …
LED Flash 2 Click is a powerful flash/torch click, featuring the MIC2870 from Microchip.
If you are building any type of human machine interface, MIKROE OLED Switch Click can help you keep the design simple, clear …
MIKROE Dot Matrix R Click is a display device Click board™ based on a four-digit dot matrix display module.
LED Driver 6 Click is a high brightness LED or LED strip driver, designed to be used in tunable Smart Connected Lighting (SCL…
MIKROE LCD mini Click displays 2x16 monochrome characters on an LMB162XFW LCD display.