Track My Order
Frequently Asked Questions
International Shipping Info
Send Email
added to your cart!
MIKROE ETH 3 Click is a compact add-on board that contains Ethernet Controller & PHY for embedded applications.
The SparkFun MicroMod mikroBUS™ Starter Kit is designed to give you just what you need to start using the MicroMod and Clic…
MIKROE PWM 2 Click offers 48 independently controlled PWM channels, available over the onboard headers, perfectly suited for …
The board communicates with the target MCU through mikroBUS™ UART (RX, TX) or I2C (SCL, SDA) interfaces.
MIKROE Terminal Click is a mikroBUS™ socket expansion board.
MIKROE USB UART Click offers a USB to asynchronous serial data (UART) interface.
MIKROE PWM Click is a simple solution for controlling 16 PWM outputs through a single I2C interface.
RiBUS Click is an adapter Click board™ that allows a mikroBUS™ to interface with RiBUS compatible display modules.
MIKROE CXPI Click is a compact add-on board that contains a transceiver that supports the next-generation automotive communic…
CAN Isolator Click provides isolated CAN communication.
Expand 8 Click is a compact add-on board that contains a multi-port I/O expander with bi-directional input/outputs.
USB UART Click carries the FT232RL, a USB to UART interface IC, from FTDI.
I2C MUX 7 Click is a compact add-on board representing a bidirectional selector dedicated to applications with I2C slave addr…
This bundle comes with the eINK Click adapter and e-Paper display 2.13”.
The LIN Click is a Click board™ that features the TLE7259-3GE, a LIN transceiver, with integrated wake-up and protection fe…
CAN FD 3 Click is a add-on board based on TLE9251V CAN network transceiver, designed for HS CAN networks up to 5 Mbit/s in au…
EXPAND 6 Click is based on the CY8C9520A, 20-bit I/O expander with EEPROM, and 4 independently configurable 8-bit PWM outputs…
This bundle comes with the eINK Click adapter and e-Paper display 1.54”.
RS485 Click 3.3V is a RS422/485 transceiver Click board™.
EXPAND 7 Click is a compact add-on board that contains a multi-port I/O expander with bi-directional input/outputs or PWM out…
EXPAND 5 Click features a low-voltage 24-bit I2C and SMBus I/O expander.
The MASWSS0115 is ideally suited for applications where a very small size and low cost are required.
MCP2518FD Click is a compact add-on board representing a complete CAN solution used as a control node in a CAN network.
UART 1-Wire Click is used to convert standard UART or RS232 signals into 1-Wire® signals.
LLC I2C Click can be utilized as the level converter for logic signals, which makes it a very useful Click board™.
MCP2517FD Click is a compact add-on board representing a complete CAN solution used as a control node in a CAN network.
Expand 4 Click carries TPCIC6A595, a chip that combines an 8-bit serial-in, parallel-out shift register with an 8-bit D-type …
Adapter Click is a breakout board which simplifies connection of add-on boards with IDC10 headers to mikroBUS™ socket.
RS485 6 Click offers a half-duplex RS-485 communication with integrated surge protection.
MCP251863 Click is a compact add-on board representing a complete CAN solution used as a control node in a CAN network.
4D - Display Click is an adapter Click board™ that offers a mikroBUS™ interface for controlling 4D Systems gen4 Series in…
MIKROE SPI Isolator 3 Click is a compact add-on board that contains a digital isolator optimized for a serial peripheral inte…
EVE Click is a display controller board in mikroBUS™ form factor.
The main component of the RS-232 Click is the MAX3232, a 3.0V to 5.5V low power, true RS-232 transceiver, from Maxim Integrat…
Terminal 2 Click is an adapter Click board™ used as a mikroBUS™ socket expansion board.
CAN FD Click features TLE9252V high speed CAN network transceiver from Infineon.
USB to I2C Click is an adapter add-on board with a general-purpose USB master to I2C/UART serial interface.
MIKROE Expand 9 Click is a compact add-on board that contains a multi-port I/O expander.
MIKROE CAN Bus Click is a compact add-on board that provides a link between the CAN protocol controller and the physical wire…
I2C Extend Click is a compact add-on board for applications that require extending the I2C communication bus over a long dist…
The RS485 5 Click is a Click board™ equipped with the MAX485, low-power, slew-rate-limited transceiver for RS-485 and RS-42…
iButton Click - is an iButton™ probe Click board™.
ATA6563 Click carries the ATA6563 high-speed CAN transceiver.
EXPAND 2 Click is an accessory board in mikroBUS™ form factor.
TFmini Click is an adapter Click board™ used to interface a compatible ToF (Time of Flight) LiDAR sensor with the host MCU.
Single Wire CAN Click is a compact add-on board that contains an IC for a single wire data link capable of operating with var…
RS485 2 Click is an RS422/485 transceiver Click board™, which can be used as an interface between the TTL level UART and th…
RS485 3 Click is an RS422/485 transceiver Click board™, which can be used as an interface between the TTL level UART and th…