Track My Order
Frequently Asked Questions
International Shipping Info
September 26, 2017
about 5 years ago
My apologies, I was looking at the wrong bit. Turns out the enable bit is a perfectly good bit to use to determine whether the Si4703 is powered up or down.
Any suggestions on how to determine the current power state?
The enabled bit resets to 0 after power up, and the disabled bit resets to 0 after power down.
Per my understanding, no, you should not connect it to 5V.
Yes, 995 would be used to tun to 99.5.
What can be done to eliminate the popping sound when enabled?
No public wish lists :(