Member Since: January 22, 2006
Country: Canada
Product SEN-13101 about 9 years ago
To answer my own question, it looks like it can be made to work by following the mods in this article: http://learn.linksprite.com/acadia/install-1026x700-7-lvds-lcd-for-pcduino3-on-linksprite-acadia/
Product SEN-13101 about 9 years ago
Will this work with the pcDuino Acadia?
Product DEV-13229 about 9 years ago
Any support for linux tools? Or does this require windows?
News - Launching our products! about 15 years ago
Just thought I'd point out that the physical layout of bitfields may differ from compiler to compiler (or architecture to architecture), so if the data is being written on an AVR and read using a program compiled on the PC, then things might not work out the way you think (you might get lucky and have them work out).
Product COM-09230 about 15 years ago
It would also be nice to bring out any extra signals (from the ATmega168) to pads or vias so that the ATMega168 could be reprogrammed for additional purposes (like say a Tachometer).
Soldering directly to the pins on the ATmega168 will also work, but requires a bit more finesse.
Product DEV-00751 about 18 years ago
Very easy to interface to. I did a really simple Tachometer using this display: http://www.DaveHylands.com/Electronics/Tachometer/
dhylands 2 items
I really want to start playing with FPGA, but I don't have...