GNSS Receiver Breakout - MAX-M10S (Qwiic) Hookup Guide
Contributors:
bboyho
bboyho 
Resources and Going Further
Now that you've successfully got your MAX-M10S up and running, it's time to incorporate it into your own project! For more information, check out the resources below:
- Schematic (PDF)
- Eagle (ZIP)
- Board Dimensions (PNG)
- Datasheet (PDF)
- Protocol Manual (PDF)
- Integration Manual (PDF)
- Product Summary (PDF)
- Release Notes (PDF)
- u-blox ECCN (PDF)
- Arduino Library
- GitHub Hardware Repo
- SFE Product Showcase
Or check out other tutorials related to GPS and GNSS:
Getting Started with the GeoFence
How to get started using the GeoFence GPS Boundary Widget and GeoFence Software.
GNSS Chip Antenna Hookup Guide
You've always wanted to experiment with those tiny GPS antennas. Now you can!
RFID Beginners Tutorial
In this tutorial we'll revisit some RFID basics and practice by making a remote work logger using an RFID reader and a GPS module. You'll scan a card and get ID, location, and time. All the perfect data to punch in and punch out from the middle of Nowhere!
Setting up a Rover Base RTK System
Getting GNSS RTCM correction data from a base to a rover is easy with a serial telemetry radio! We'll show you how to get your high precision RTK GNSS system setup and running.