Keyboard Shortcut, Qwiic Keypad
Contributors:
santaimpersonator
Resources and Going Further
For more information, check out the resources below:
- SFE Product Showcase
- Enginursday Blog Post: Pressing Our Buttons
- Table of Keyboard Shortcuts
- USB HID Keycode Usage Table
- Circuit Python Documentation Page
- Arduino HID-Project Library GitHub Repository
If you haven't already gone through the hookup guides for components used in this project, we highly suggest starting off there to understand the basic functionality of each board:
Qwiic Keypad Hookup Guide
If you are tired of taking up GPIO pins, wiring a bunch of pull up resistors, and using firmware that scans the keys taking up valuable processing time... check out the new Qwiic Keypad.
RedBoard Turbo Hookup Guide
An introduction to the RedBoard Turbo. Level up your Arduino-skills with the powerful SAMD21 ARM Cortex M0+ processor!
Check out other Qwiic products and tutorials here:
Qwiic VR IMU (BNO080) Hookup Guide
Figure out how things are oriented with the robust 9 degrees of freedom (DOF) BNO080 IMU. Maybe even make your own virtual reality (VR) applications if you're feeling savvy.
SparkFun SAMD21 Pro RF Hookup Guide
Using the super blazing, nay blinding, fast SAMD21 whipping clock cycles at 48MHz and the RFM96 module to connect to the Things Network (and other Radio woodles).
Power Delivery Board - USB-C (Qwiic) Hookup Guide
This guide will go over how to use the USB Type-C Power Delivery Board.
Artemis Global Tracker Hookup Guide
The SparkFun Artemis Global Tracker combines the Artemis processor with an Iridium 9603N satellite transceiver, ZOE-M8Q GNSS transceiver, and MS8607 PHT sensor. With a clear view of the sky, this board allows you to send and receive short data messages from anywhere in the world including remote locations far beyond the reach of WiFi and GSM networks. Follow this guide to get started with the Artemis Global Tracker.