LoRaWAN with ProRF and The Things Network
Contributors:
Nick Poole
Resources and Going Further
Now that you know all about LoRaWAN, how will you use it? There are a few hookup guides that can help you get started with the SparkX Pro RF - LoRa®-enabled 915MHz board. While support is limited for SparkX products, these should get you moving in the right direction.
- Pro Micro Hookup Guide
- RFM69 Hookup Guide - This is the hookup guide for the RFM69 breakout board. The RFM95W module used on the SparkX Pro RF - LoRa® enabled board is in essence a drop in for the RFM69 module with 2 additional GPIO pins to enable LoRa®. Also be aware that the two use different libraries.
Even more resources:
- The Things Network: LoRaWAN™
- LoRa Alliance™
- LoRa and Pycom
- The Things Industries
- LMIC-Arduino GitHub Repository
- IFTTT
- Wikipedia: Frequency-Shift Keying (FSK)
Need inspiration? Feel free to check out some of the following tutorials!
IoT Tutorials
Hazardous Gas Monitor
Build a portable gas monitor to check for dangerous levels of hazardous gases.
MicroPython Programming Tutorial: Getting Started with the ESP32 Thing
MicroPython is an implementation and subset of the Python 3 programming language that can be used on microcontrollers. This guide will walk you through writing MicroPython programs for the ESP32 Thing development board.
MicroMod nRF52840 Processor Hookup Guide
Get started with the MicroMod nRF52840 Processor following this guide.
Connecting Thing Plus Matter to Google Nest Hub
Connect your Thing Plus Matter board to a Google Nest Hub, as well as the Google Home app, and set up as a light device!
Wireless Tutorials
ESP32 Thing Power Control Shield Hookup Guide
This tutorial shows you how to get started with the ESP32 Thing Power Control Shield.
Using the PSoC 6 Pioneer Board with the Pioneer IoT Add-on Shield
Cypress's PSoC 6 Pioneer Board is a development tool for the powerful PSoC 6 processor. In this tutorial, we'll show you how to use the PSoC 6 Pioneer Board along with the SparkFun/Digi-Key Pioneer IoT Add-on Shield to send data to a Raspberry Pi via BLE or WiFi.
Wireless Gesture Controlled Robot
Control the RedBot wirelessly based on the movement of your hand using an accelerometer, Arduino, and XBees!
1W LoRa MicroMod Function Board Hookup Guide
Everything you need to get started with the 1W LoRa MicroMod function board; a MicroMod function board that provides LoRa capabilities for your MicroMod project. Must be used in conjunction with a MicroMod main board and processor.
Or check out this blog post for even more fun inspiration!