MicroMod GNSS Carrier Board (ZED-F9P) Hookup Guide

≡ Pages

Contributors:

bboyho,

Elias The Sparkiest

Favorited Favorite 0

Resources and Going Further

Ready to get hands-on with GPS?

We've got a page just for you! We'll walk you through the basics of how GPS works, the hardware needed, and project tutorials to get you started.

Take me there!

Now that you've successfully got your MicroMod GNSS Carrier Board (ZED-F9P) up and running, it's time to incorporate it into your own project! For more information, check out the resources below:

Schematic (PDF)
Eagle Files (ZIP)
Board Dimensions (PNG)
Datasheet (PDF) (ZED-F9P)
UBX and NMEA Protocol Manual (PDF) (ZED-F9P)
Integration Manual (PDF) (ZED-F9P)
Product Summary (PDF) (ZED-F9P)
Release Notes - FW1.00 (PDF) (ZED-F9P)
Example RTCM output (PDF) from the ZED-F9P
u-blox ECCN (PDF)
Arduino Library
GitHub Hardware Repo
SFE Product Showcase

Need some inspiration for your next project? Check out some of these related tutorials:

SparkFun GPS Breakout (ZOE-M8Q and SAM-M8Q) Hookup Guide

The SparkFun ZOE-M8Q and SAM-M8Q are two similarly powerful GPS units but with different project applications. We'll compare both chips before getting each up and running.

Favorited Favorite 1

SparkFun GPS NEO-M9N Hookup Guide

The u-blox NEO-M9N is a powerful GPS unit that comes with a chip antenna, SMA connector, and u.FL connector. We will quickly get you set up using the Qwiic ecosystem and Arduino so that you can start reading the output!

Favorited Favorite 3

SparkFun GPS Dead Reckoning NEO-M8U Hookup Guide

The u-blox NEO-M8U is a powerful GPS units that takes advantage of untethered dead reckoning (UDR) technology for navigation. The module provides continuous positioning for vehicles in urban environments and during complete signal loss (e.g. short tunnels and parking garages). We will quickly get you set up using the Qwiic ecosystem and Arduino so that you can start reading the output!

Favorited Favorite 3