MS5803-14BA Pressure Sensor Hookup Guide
Contributors:
CaseyTheRobot
Resources and Going Further
Now that you've successfully got your MS5803-14BA Pressure Sensor up and running, it's time to incorporate it into your own project! For more information, check out the resources below:
- Schematic
- Eagle Files
- Datasheet (MS5803-14BA)
- GitHub
- SFE Product Showcase
Need some inspiration for your next project? Check out some of these related tutorials:
Creating a Humidor Control Box
Because some of our boards need to be re-humidified after reflow, we decided to make our own humidor. This tutorial will focus on how to model a project in 3D and then fabricate it using a CNC routing machine.
micro:climate Kit Experiment Guide
A weather station kit that is built on top of the inexpensive, easy-to-use micro:bit and Microsoft MakeCode.
SparkFun Absolute Digital Barometer - LPS28DFW (Qwiic) Hookup Guide
Get started adding water-resistant pressure sensing using the SparkFun Absolute Digital Barometer - LPS28DFW (Qwiic) following this guide.
Tip: If you are submerging the sensor in a liquid, try sealing the board in silicone conformal coating while keeping the gel membrane exposed to the medium. Just keep in mind that the antimagnetic stainless steel cap only protects against "30 bar overpressure water resistance" as stated in the datasheet.
If you have any problems or questions, our technical support department can help. Please don't hesitate to contact us. We also love to hear about your projects!