PIC-Based Serial Enabled Character LCD Hookup Guide
Contributors:
bboyho, 
MikeGrusin
bboyho, MikeGrusin 
Resources and Going Further
Now that you've successfully got your serial enabled LCD up and running, it's time to incorporate it into your own project!
For more information, check out the resources below:
- Application Note
- Built-In Serial Enabled LCD 16x2
- HD44780
- Datasheet
- LCD User-Defined Graphics - If you would like to create a custom character, you would need to send a command byte before controlling the individual pixels in the character square.
- SparkFun Forums: Custom Characters on the Serial Enabled LCD Backpack
- Arduino Forums: Changing SparkFun Splash
- GitHub Repo - Serial enabled backpack design files, default firmware, and example code.
Need some inspiration for your next project? Check out some of these related tutorials:
Using an LCD on the Edison
How to connect an LCD controlled by an ILI9341 driver to the Intel® Edison.
Blynk Board Project Guide
A series of Blynk projects you can set up on the Blynk Board without ever re-programming it.
SparkFun Inventor's Kit Experiment Guide - v4.1
The SparkFun Inventor's Kit (SIK) Experiment Guide contains all of the information needed to build all five projects, encompassing 16 circuits, in the latest version of the kit, v4.1.2 and v4.1.
Displaying Sensor Data with Bluetooth
In our previous Bluetooth tutorial called Sending Sensor Data Via Bluetooth, we showed how to display data from a triple axis accelerometer over the Arduino IDE’s serial monitor. Continuing off of the first tutorial, we are going to expand this project to include more capabilities for visualizing and interacting with your accelerometer data.