RedBot Assembly Guide Rev 02
This Tutorial is Retired!
This tutorial covers concepts or technologies that are no longer current. It's still here for you to read and enjoy, but may not be as useful as our newest tutorials.
Contributors:
HelloTechie, 
SFUptownMaker
HelloTechie, SFUptownMaker 
RedBot Mainboard
In this section, you will adding the brains of the robot: the RedBot Mainboard.
Locate the Following:
| 4x 4-40 x 1/4" Phillips Screw | 1x RedBot Mainboard |
 |
 |
Adding the RedBot Mainboard
Line up the four corner holes of the RedBot Mainboard to the four 4-40 x ⅜" metal standoffs on the top chassis piece. You will want the barrel jack on the RedBot Mainboard to be on the left side. Using four 4-40 x 1/4" Phillips screws, tighten down the RedBot Mainboard to the four 4-40 x ⅜" metal standoffs.
