RHT03 (DHT22) Humidity and Temperature Sensor Hookup Guide
Contributors:
bboyho
bboyho 
Resources & Going Further
Now that you've successfully got your RHT03 up and running, it's time to incorporate it into your own project! For more information, check out the resources below:
- Datasheet
- Arduino.cc: "DHTlib" Arduino Library - Alternative Arduino library
- C Example Code
- mbed Example Code
- Libraries
- GitHub
Looking for more examples that monitor the environment? Check out the following tutorials.
HIH-4030 Humidity Sensor Hookup Guide
Measure relative humidity with SparkFun's HIH-4030 Humidity Sensor Breakout.
Qwiic Atmospheric Sensor (BME280) Hookup Guide
Measure temperature, humidity, barometric pressure with the SparkFun Atmospheric Sensor Breakout BME280 (Qwiic).
Artemis Global Tracker Hookup Guide
The SparkFun Artemis Global Tracker combines the Artemis processor with an Iridium 9603N satellite transceiver, ZOE-M8Q GNSS transceiver, and MS8607 PHT sensor. With a clear view of the sky, this board allows you to send and receive short data messages from anywhere in the world including remote locations far beyond the reach of WiFi and GSM networks. Follow this guide to get started with the Artemis Global Tracker.
SparkFun Thing Plus - NINA-B306 Hookup Guide
A quick guide to get started using the SparkFun Thing Plus - NINA-B306. This Thing Plus is loaded with the Arm Cortex-M4 processor in the NINA-B306 along with on-board motion and environmental sensors in the ISM330DHCX 6DoF and BME280 pressure and temperature sensor.