- Home
- Product Categories
- Headers
- Header - 2x23-pin Male (PTH, 0.1")
Header - 2x23-pin Male (PTH, 0.1")
This is a 2x23 pin male PTH header. This piece is in the common configuration for Beaglebone Black headers that can be broken apart to form smaller header formations. Each pin has a spacing of 0.1" in between each other.
Header - 2x23-pin Male (PTH, 0.1") Product Help and Resources
Core Skill: Soldering
This skill defines how difficult the soldering is on a particular product. It might be a couple simple solder joints, or require special reflow tools.
Skill Level: Noob - Some basic soldering is required, but it is limited to a just a few pins, basic through-hole soldering, and couple (if any) polarized components. A basic soldering iron is all you should need.
See all skill levels
Comments
Looking for answers to technical questions?
We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.
Customer Reviews
4 out of 5
Based on 2 ratings:
good but not very modular
Robust headers, just annoyed they didn't break cleanly with cutters or pliers. FYI, plan on sacrificing 2 pins with every break.
Double Header beam
Always have a wide selection of pins available. Never know when you’ll need to replace a few, or just one. Some times you'll want to add stability, and a 2x2 in the breadboard on a board will do just that.