Creative Commons images are CC BY-NC-SA 3.0

$ 7.95

added to your
shopping cart

In stock 135 in stock
7.95 1+ units
7.55 25+ units
7.16 100+ units

Description: This is a replacement soldering tip for our Hakko FX-888 soldering iron. This is a conical type of soldering tip. Replacing the tip is very easy - simply unscrew the shield, slip the replacement tip in, and screw the shield back on.

Note: This is the tip that ships with the FX-888.


Recommended Products

Customer Comments

  • This tip is not the one that shipped with my FX-888. Instead it was the Chisel (T18-D16).

  • will this work with the hakko 936b?

    • No, the inner diameter is smaller on 888 tips. The heating element won’t fit in it.

  • The Dimensional Drawing link is not quite right I get this when I click on it:
    This XML file does not appear to have any style information associated with it. The document tree is shown below.

    Access Denied


  • what is the difference between hakko and plug type tips?

  • This fit perfectly on my 907 Iron, used with a Hakko 936. It appears to be the same in/out diameter compared to the tip that came with the iron originally (T18-D16).

Customer Reviews

5 out of 5

Based on 1 ratings:

5 star
4 star
3 star
2 star
1 star

1 of 1 found this helpful:

Excellent tip!

Very easy to replace the tip on Hakko FX-888. I was skeptical about its ability to transfer heat due to its size, but that concern quickly vanished when I soldered my first wire with this tip. I even got a finer tip from Hakko and found no difference in heat transfer from either tip… must be the excellent design of the Hakko soldering station.