Creative Commons images are CC BY 2.0

$ 2.95

Notify Me

added to your
shopping cart

Out of stock out of stock
2.95 1+ units
2.80 25+ units
2.66 100+ units

We do not currently have an estimate of when this product will be back in stock.

Need larger quantities?
Check out our Volume Sales program

Description: This is a 12" servo extension cable. This comes in very handy when your servo is further away from the controller than the wire on the servo allows. Male connector on one end goes to controller, female connector mates with servo. Fits all Hitec, Futaba, JR, Multiplex, and Airtronics Z servos. Wire can also be used as a simple 0.1" jumper cable.

Note: These wires have a weird naming convention. Both ends of this wire have what, in most cases, should be called a female connector; but, for these wires, the presence (or lack thereof) of the plastic shroud is what makes an end female or male. If you’re looking to plug one end of these wires into a breadboard, you could stick our breakaway male headers into the un-shrouded end to make it a true male connector.

Recommended Products

Customer Comments

  • With the updated description, I knew exactly what I was getting, and am very happy with what I got. These are perfect for adapting VEX robotics sensors and motors to non-VEX controllers.

    Regarding wire thickness, I’m happy with the heavier wire, since it can pass decent current and is mechanically stronger than tiny wires - though the description should say what the wire gauge is. I agree they might be a bit heavy for RC applications where every gram matters.

  • This is not an extension cable. The shroud physically holds the servo header and jumper header together but there are no pins with it to make the electrical connection. I’m annoyed at myself for buying this considering the picture above.

  • Agreed with MrTidy. Do not buy this thinking you can extend a servo cable.

  • The picture also doesn’t show the fact that the wire is a much heavier gauge than shown, and also way stiffer. Pretty disappointed.

  • We use these for our RC receiver to servo extensions. The end with the shroud is the male end. This end has the servo wire plugged into it to lengthen it. The other smaller/unshrouded end (female) plugs into the receiver which has male pins. So rename this to Servo Extension Cable - Female to Male (shrouded)

  • Another fact, the cable is very thick and it is not suitable for a robotic or RC project. I’m stuck with 16 cables that I cant use :(

  • The title of this product should be changed to Female-to-Female with plastic shroud !! I bought it thinking that it is male to female.

Customer Reviews

No reviews yet.