Crimp Pins for Dust Sensor Connector

This is a crimp pin for the ZH-6 JST connector, which can be used to interface with the GP2Y1010AU0F Optical Dust Sensor. These are sold as individual crimp pins, so get 6 if you're getting them for that connector.

They should work with wires ranging from 28 to 26 AWG.

Comments

Looking for answers to technical questions?

We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.

  • My students were able to crimp about 60% of these successfully with regular needle-nose pliers. If you want a higher success rate, use crimping pliers, which in my lab are named "the precioussss."

Customer Reviews

4 out of 5

Based on 1 ratings:

Currently viewing all customer reviews.

2 of 2 found this helpful:

Do the job

Used them when I didn't really know enough for what I was doing. Work with the connector and dust sensor. I had to crimp them with needle nose, and I wouldn't recommend it. Was a log pain of a day.