Creative Commons images are CC BY-NC-SA 3.0


This product has been retired from our catalog and is no longer for sale.

This page is made available for those looking for datasheets and the simply curious. Please refer to the description to see if a replacement part is available.

Replacement: None. We are no longer carrying this item, but have a look at the rest of our development tools! This page is for reference only.

Description: Prototype board for 8 pin PIC microcontrollers with 4MHz ceramic resonator, external 8K EEPROM, power supply circuit, and RS232 port. Two small holes for for soldering in two DC power lines (Vdd/Gnd): anything above 7 volts will work, the 78L05 voltage regulator will take care of the rest. This is a great test bed for many projects!

Please note: There is no ICSP/ICD port. You can either wire your own ICSP port, or simply remove the chip for programming and reinsert it into the socket.

  • FR-4, 1.5 mm (0.062"), green solder mask, white silkscreen component print
  • Dimensions 43x81 mm (1.7x3.2")
  • Voltage regulator 78L05 and filtering capacitors
  • Stable 4MHz Ceramic Resonator
  • I2C EEPROM - 24C08
  • DIL8 microcontroller socket
  • RS232 DB9 female connector
  • RS232 interface circuit
  • Extension slot 6 pins for GPIO0-GPIO5
  • Grid 100 mils
  • Four mounting holes 3.3 mm (0.13")


Board does not come with PIC installed. Please see a list of related ICs below.

Comments 0 comments

Related Products