×

Hello and Welcome! If you have a technical question please check out our Forums. If you have an order or shipping question please refer to our Customer Support page. Please see all COVID-19 updates here and thank you for your continued support.

×

Please take our customer survey for a chance to win $1000 in SparkFun credit! We really appreciate the time you take to give us your extremely valuable feedback on how SparkFun can be its best - we couldn't do it without your input. Thank you!

Terminal Development Board - LPC2138

Replacement: None. We are no longer stocking this board, but check out our other LPC development boards. This page is for reference only.

Compact development board with key pad, back lit LCD, buzzer, and relay.

  • MCU: 16/32 bit** LPC2138**
  • 512K Bytes Program Flash, 32K Bytes RAM, 8 Channel 10-bit ADC, RTC, 2x UARTs, I2C, SPI, 2x 32bit TIMERS, 8x CCR, 6x PWM, WDT, 5V tolerant I/O, up to 60MHz operation
  • 14.7456 MHz crystal divides down for easy communication setup
  • Internal 4x PLL = 58.9824 MHz CPU clock
  • JTAG connector as per ARM's 2x10 pin layout, ARM-JTAG (Wiggler) compatible
  • RS232 interface circuit
  • LCD16x2 display with LED Backlight
  • Five buttons
  • Dallas iButton port
  • Frequency input
  • Relay with 10A/250VAC contacts
  • Buzzer
  • Status LED
  • RESET circuit
  • Boot loader enable jumper and pull-up
  • DBGSEL, RTCK pull-up resistors
  • Power supply: 6VAC/+9VDC
  • Three on board voltage regulators rated up to 800mA - 1.8V, 3.3V, and 5V
  • Power supply decoupling/filter capacitors
  • Four mounting holes
  • PCB: FR-4, 1.5 mm (0.062"), green solder mask, white silkscreen component print
  • 4.75x1.5" (120x38mm)

Comments

Looking for answers to technical questions?

We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.

Customer Reviews

No reviews yet.