Creative Commons images are CC BY-NC-SA 3.0

Retired RETIRED

This product has been retired from our catalog and is no longer for sale.

This page is made available for those looking for datasheets and the simply curious. Please refer to the description to see if a replacement part is available.

Replacement: None. We are no longer carrying this dev board in our catalog. This page is for reference only.

Description: Carrier board for the SAM7 ARM processor.

Dimensions: 4.7x3.15" (80x120 mm)

Features:

  • MCU: AT91SAM7S64 16/32 bit ARM7TDMI™ with 64K Bytes Program Flash, 16K Bytes RAM, USB 2.0, RTT, 10 bit ADC 384 ksps, 2x UARTs, TWI (I2C), SPI, 3x 32bit TIMERS, 4x PWM, SSC, WDT, PDC (DMA) for all peripherals, up to 60MHz operation
  • Standard JTAG connector with ARM 2x10 pin layout for programming/debugging with ARM-JTAG
  • USB connector
  • Two channel RS232 interface and drivers
  • SD/MMC card connector
  • Two buttons
  • Trimpot connected to ADC
  • Thermistor connected to ADC
  • two status LEDs
  • On board voltage regulator 3.3V with up to 800mA current
  • Single power supply: 6V AC or DC required
  • Power supply LED
  • Power supply filtering capacitor
  • Reset circuit
  • Reset button
  • 12 MHz crystal on socket
  • Extension headers for all uC ports
  • PCB: FR-4, 1.5 mm (0.062"), soldermask, silkscreen component print

Documents:

Comments 2 comments

  • The “Getting Started” link is out of date;

    Now it’s http://www.techtoys.com.hk/Downloads/Download/ARM/SAM7/Getting%20started%20_SAM7.pdf

  • The latest version of this board looks slightly different from the picture. The new board has SMD LEDs, the card slot is on the underside, and the trimpot has a knob on it. The functionality is the same.


Related Products