Creative Commons images are CC BY-NC-SA 3.0

Retired RETIRED

This product has been retired from our catalog and is no longer for sale.

This page is made available for those looking for datasheets and the simply curious. Please refer to the description to see if a replacement part is available.

Replacement: None. We do not have a direct replacement for this board. This page is for reference only.

Description: Development Board for the STR712 ARM7.

Features:

  • MCU: STR712FR2T6 16/32 bit ARM7TDMI™ with 256K Bytes Program Flash, 64K Bytes RAM, CAN, RTC, 12 bit ADC, 4x UARTs, 2x I2C,2x SPI, 5x 32bit TIMERS, 2x PWM, 2x CCR, WDT, up to 50MHz operation
  • Standard JTAG connector with ARM 2x10 pin layout for programming/debugging with ARM-JTAG
  • CAN connector
  • RS232 interface and driver
  • Buttons
  • Status LED
  • UEXT - 10 pin extension connector for Olimex addon peripherials like MP3, RF2.4Ghz, RFID etc. modules
  • On board voltage regulator 3.3V with up to 800mA current
  • Single power supply: 6V AC or DC required
  • Power supply LED
  • Power supply filtering capacitor
  • Reset circuit
  • Reset button
  • 4MHz crystal oscillator
  • 32.768kHz crystal and RTC backup battery connector
  • Extension headers for all uC ports
  • PCB: FR-4, 1.5 mm (0.062"), soldermask, silkscreen component print

Dimensions: 100 x 90 mm (3.93 x 3.54")

Documents:

Comments 5 comments

  • What I exactly need to program this board?
    1. (HW) Development Board STR712 ARM
    2. (HW) JTAG Programmer/Debugger for ARM processors
    3. (SW) CodeSourcery GCC toolchain
    4. My PC
    5. ???

  • reemrevnivek:

    This has ample room for a C program. You’ll want to use the free CodeSourcery GCC toolchain.
    I’ve ordered the board; it’s too good a deal to pass up. It hasn’t arrived. The Codesourcery docs for the EABI free package say I’ll need a linker script, which they don’t include for this board. Is one available, or can I create one, or is there another technique that doesn’t require one?

  • Can this be programmed in C or does it need to be assembly? Any “Getting Started” guide. I’ve done some Arduino and PIC stuff and want to move up in power. Is this a good place to start?

    • This has ample room for a C program. You’ll want to use the free CodeSourcery GCC toolchain.
      The ARM7TDMI on this board has been one of the most popular ARM chips for a long time now, but it’s being phased out in favor of the Cortex-M3 line. There will be lots of support available, it’ll just be a few years old.
      This is a fantastic place to start, especially at this price!


Related Products