Copernicus II Hookup Guide
Contributors:
Toni_K
Toni_K 
Resources and Going Further
Now that you've gotten your module hooked up and can collect gps data from it, it's time to start integrating the module into your projects. Think about adding in gps navigation to an autonomous robot or creating a data logger for your car to track gas usage in different areas. Let us know what kind of cool projects you come up with, and leave us any feedback you might have on the tutorial. Check the files below for additional resources.
Resources
- Breakout Board Schematic (PDF)
- Breakout Board Eagle Files (ZIP)
- Copernicus II Datasheet
- GPSStudio Users Guide
- SparkFun GPS Tracking Tutorial
- GPS Tutorial by Michael Simpson
- Trimble Studio & Support Tools
- GitHub - Design files and archived library
Need some inspiration for your next project? Check out some of these related tutorials:
Advanced Autonomous Kit for Sphero RVR Assembly Guide
Get your Advanced Autonomous Kit for the Sphero RVR built up with this hookup guide!
How to Build a DIY GNSS Reference Station
Learn how to affix a GNSS antenna, use PPP to get its ECEF coordinates and then broadcast your own RTCM data over the internet and cellular using NTRIP to increase rover reception to 10km!
MicroMod Update Tool Hookup Guide
Follow this guide to learn how to use the MicroMod Update Tool to interact directly with the UART on the MicroMod Asset Tracker's SARA-R5. Using this board you can talk directly to the module using u-blox's m-center software as well as update the firmware using EasyFlash.