- Home
- Product Categories
- Servo Motor
- Servo - Generic Metal Gear (Micro Size)
Servo - Generic Metal Gear (Micro Size)
Here is a simple, low-cost, high quality servo for all your mechatronic needs. This servo is able to take in 6 volts and deliver 44.4 oz-in. of maximum torque at 0.18 sec/60°
This is a small servo with a standard 3 pin power and control cable (red = power, brown = ground, and yellow = data), and all hardware listed below.
- Voltage: 4.8-6.0 Volts
- Torque: 38.8/44.4 oz-in. (4.8/6.0V)
- Speed: 0.20/0.18 sec/60° (4.8/6.0V)
- Rotation: 160°
- Metal Gears* 28.8 x 13.8 x 30.2mm
- Wire Length: 180mm
- Weight: 20g
Servo - Generic Metal Gear (Micro Size) Product Help and Resources
Servo Trigger Hookup Guide
March 26, 2015
How to use the SparkFun Servo Trigger to control a vast array of Servo Motors, without any programming!
Hobby Servo Tutorial
May 26, 2016
Servos are motors that allow you to accurately control the rotation of the output shaft, opening up all kinds of possibilities for robotics and other projects.
Core Skill: Robotics
This skill concerns mechanical and robotics knowledge. You may need to know how mechanical parts interact, how motors work, or how to use motor drivers and controllers.
Skill Level: Competent - You may need an understanding of servo motors and how to drive them. Additionally, you may need some fundamental understanding of motor controllers.
See all skill levels
Core Skill: DIY
Whether it's for assembling a kit, hacking an enclosure, or creating your own parts; the DIY skill is all about knowing how to use tools and the techniques associated with them.
Skill Level: Noob - Basic assembly is required. You may need to provide your own basic tools like a screwdriver, hammer or scissors. Power tools or custom parts are not required. Instructions will be included and easy to follow. Sewing may be required, but only with included patterns.
See all skill levels
Core Skill: Electrical Prototyping
If it requires power, you need to know how much, what all the pins do, and how to hook it up. You may need to reference datasheets, schematics, and know the ins and outs of electronics.
Skill Level: Competent - You will be required to reference a datasheet or schematic to know how to use a component. Your knowledge of a datasheet will only require basic features like power requirements, pinouts, or communications type. Also, you may need a power supply that?s greater than 12V or more than 1A worth of current.
See all skill levels
Comments
Looking for answers to technical questions?
We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.
Customer Reviews
3.7 out of 5
Based on 3 ratings:
1 of 1 found this helpful:
works as advertised.
Good servo. Lots of torque with little power consumed. Quite a bit of play in the gears, though. I burned one of them up by applying 9 volts with no control signal, You're not supposed to do that! Believe it.
Needs better documentation
It's fine but needs better documentation. The spline is 25T.
Works
Works correctly but I may not understand "micro" vs "sub micro" sizing. Bought this to fit in an enclosure for a micro size servo, turns out it is 5mm too wide and I actually need the "sub-micro" ROB-09065. Data sheet dimensions are accurate to the product, but some more details in the description may have helped me avoid this mistake.
Where can I find how much power draw this servo uses?