- Home
- Product Categories
- Robotics Kits
- JetBot Chassis Kit
JetBot Chassis Kit
The JetBot Chassis Kit is the official chassis used on the SparkFun JetBot AI Kit but can be used for many different robotics platforms. The chassis plates are made from 3.5mm thick ABS plastic milled with plenty of mounting points for sensors, servos, controllers, power and more. Assembly is simple; with just a few included screws needed for construction, you will have a reliable 2WD robotics chassis. A great economical option for desktop robots.
The JetBot chassis kit comes with two motors, two wheels, frames, a ball caster and all assembly materials like screws and standoffs. There are also the included materials for an optional camera mount to be added to your chassis.
Note: The JetBot Chassis Kit does NOT include a motor controller or a power source. These items will need to be purchased separately. Assembly & basic tools are required.
- 2x Base Plate
- 4x Motor Mount
- 2x Wheel
- 2x Motor
- 1x Camera Mount
- 1x Ball Caster
- All Hardware Needed for Assembly
- NOT INCLUDED - Phillips head screwdriver
JetBot Chassis Kit Product Help and Resources
Core Skill: DIY
Whether it's for assembling a kit, hacking an enclosure, or creating your own parts; the DIY skill is all about knowing how to use tools and the techniques associated with them.
Skill Level: Noob - Basic assembly is required. You may need to provide your own basic tools like a screwdriver, hammer or scissors. Power tools or custom parts are not required. Instructions will be included and easy to follow. Sewing may be required, but only with included patterns.
See all skill levels
Comments
Looking for answers to technical questions?
We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.
Customer Reviews
No reviews yet.
Could you please share the base plate's 3D model or the blue print with all the dimensions? This kit is perfect for the Jetson Nano but I want to 3D print some brackets for additional sensors and would like to match the base plate holes. Thank you
I was about to ask this same question; it's (annoying? dumb? I don't want to sound condescending) that dimensional information is not available for a chassis "with plenty of mounting options." Who is the manufacturer, so I can send them an email with the request for information?
Unfortunately, that would have to come from the manufacturer. As they provided this chassis specifically to be used with the Jetson, I am doubtful that they would be willing to give away their design like that.