×

Prolonged severe weather across the U.S. is causing delays including the ability to transport and deliver packages in certain cities. Please see here for more details. Thank you for your continued support and patience.

×

Please see all COVID-19 updates here as some shipments may be delayed due to CDC safety and staffing guidelines. If you have an order or shipping question please refer to our Customer Support page. For technical questions please check out our Forums. Thank you for your continued support.

JetBot Chassis Kit V2

The JetBot Chassis Kit V2 is the official chassis used on the SparkFun JetBot AI Kit but can be used for many different robotics platforms. The chassis plates are made from 3.5mm thick ABS plastic milled with plenty of mounting points for sensors, servos, controllers, power and more. Assembly is simple; with just a few included screws needed for construction, you will have a reliable 2WD robotics chassis. A great economical option for desktop robots.

The JetBot chassis kit comes with two motors, two wheels, frames, a ball caster and all assembly materials like screws and standoffs. There are also the included materials for an optional camera mount to be added to your chassis.

Note: The JetBot Chassis Kit does NOT include a motor controller or a power source. These items will need to be purchased separately. Assembly & basic tools are required.

  • 2x Base Plate
  • 4x Motor Mount
  • 2x Wheel
  • 2x Motor
  • 1x Camera Mount (allows two cameras to be mounted)
  • 1x Ball Caster
  • All Hardware Needed for Assembly
  • NOT INCLUDED - Phillips head screwdriver

Updates vs. the original Jetson Chassis Kit (V1)

  • V2 was adapted to allow for 2x cameras to be mounted in accordance with the NVIDIA Jetson Nano Developer Kit (V3).
  • This chassis also has mounting holes specifically spaced for the Jetson Nano Dev kit (4GB & 2GB) that are oriented to allow the camera ribbon connector on the Dev Board to be as close as possible to the camera mount on the chassis. This increases the ease of assembly & increases the longevity of the camera connector.

JetBot Chassis Kit V2 Product Help and Resources

Assembly Guide for SparkFun JetBot AI Kit V2.0

March 27, 2020

Assembly Guide for the SparkFun JetBot AI Kit v2.0. This tutorial includes photos & comments to assemble the two-layer chassis & additional components unique to the JetBot kit.

Core Skill: DIY

Whether it's for assembling a kit, hacking an enclosure, or creating your own parts; the DIY skill is all about knowing how to use tools and the techniques associated with them.

1 DIY

Skill Level: Noob - Basic assembly is required. You may need to provide your own basic tools like a screwdriver, hammer or scissors. Power tools or custom parts are not required. Instructions will be included and easy to follow. Sewing may be required, but only with included patterns.
See all skill levels


Comments

Looking for answers to technical questions?

We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.

Customer Reviews

No reviews yet.