Track My Order
Frequently Asked Questions
International Shipping Info
Send Email
Jump to Subcategory:
ADC 18 Click is a compact add-on board that contains a high-performance data converter.
MIKROE Multimeter Click is designed to measure voltage, current, resistance, and capacitance properties of the components, co…
V to Hz 2 Click is a device that converts an analog voltage input signal into a pulse wave signal of a certain frequency.
Riverdi Click is an adapter for connecting Riverdi TFT displays to a mikroBUS socket.
DigiVref Click is a very precise voltage reference Click board™, which allows one of four different voltage values to be se…
The ISO ADC Click is add-on board current-shunt measurement device with isolated delta-sigma modulator.
10-pin 0.05" pitch ARM Cortex Debug adapter with flat cable included for UNI CODEGRIP.
Terminal 2 Click is an adapter Click board™ used as a mikroBUS™ socket expansion board.
SPI Isolator 6 Click is a compact add-on board representing a digital isolator optimized for a serial peripheral interface.
mikroBUS Shuttle is a small add-on board, which is intended to be used with Shuttle Click, in order to expand the mikroBUS™…
Opto 3 Click is a relay Click board™, equipped with two pairs of optically isolated solid-state relays (SSR).
CAN Isolator Click provides isolated CAN communication.
MIKROE USB UART Click offers a USB to asynchronous serial data (UART) interface.
A5000 Plug&Trust Click is a compact add-on board representing a ready-to-use secure IoT authenticator.
MCP2518FD Click is a compact add-on board representing a complete CAN solution used as a control node in a CAN network.
EXPAND 2 Click is an accessory board in mikroBUS™ form factor.
20-pin 0.05 ARM Cortex Debug +ETM adapter for UNI CODEGRIP.
Expand 3 Click carries DS2408, an 8-channel programmable I/O expander.
SolidSwitch 3 Click is a compact add-on board that contains a load switching device.
MUX Click is a Click board™ that switches one of the four differential inputs to one differential output.
TFmini Click is an adapter Click board™ used to interface a compatible ToF (Time of Flight) LiDAR sensor with the host MCU.
It’s a compact and easy solution for adding SPI serial communication via USB cable.
DAC 9 Click is a compact add-on board that contains a fully-featured, highly accurate digital-to-analog converter.
ADC 6 Click is an advanced 24bit multichannel analog to digital converter (ADC).
MIKROE BarGraph 4 Click is a compact add-on board that contains four green four-segment LED bar graph displays.
EXPAND 6 Click is based on the CY8C9520A, 20-bit I/O expander with EEPROM, and 4 independently configurable 8-bit PWM outputs…
DAC 12 Click is a compact add-on board that contains a highly accurate digital-to-analog converter.
ATA6563 Click carries the ATA6563 high-speed CAN transceiver.
A universal programmer and debugger for ARM® Cortex®-M, RISC-V, PIC®, dsPIC, PIC32, and AVR over USB-C.
DAC 5 Click carries Texas Instruments DAC53608 IC, a low-power, eight-channel, 10-bit buffered Digital-to-Analog Converter.
MIKROE SPI Extend Click is a compact add-on board for applications that require extending the SPI communication bus over a lo…
AD-SWIO 2 Click is a quad-channel software configurable input/output solution based on AD74413R, for building and process con…
The pi-top [3] is a Raspberry Pi laptop that helps you start learning how to code, create awesome devices, and take your know…
It features a microSD card slot for microSD cards used as a mass storage media for portable devices.
MIKROE DAQ Click is a compact add-on board representing a data acquisition solution.
MIKROE EEPROM Click is an accessory board in mikroBUS™ form factor.
ADC 16 Click is a compact add-on board that contains a high-performance data converter.
MCP2003B Click is a mikroBUS™ add-on board with a bi-directional LIN transceiver.
eINK Click is an adapter Click board™, used to interface a compatible eINK display with the host MCU.
Opto 5 Click is a compact add-on board that provides uncomplicated safety isolation from the high voltage.
AN to PWM 2 Click is based on the LTC6992CS6, a voltage-controlled PWM generator from Analog Devices.
ADC3 Click carries Microchip’s MCP3428 16-bit multichannel analog-to-digital converter.
Ammeter Click is a mikroBUS™ add-on board with circuitry for measuring electric current (both AC and DC).
I2C 1-Wire Click carries DS2482-800, a “bridge device” that performs bidirectional conversions between I2C controller and…
ADAC 3 Click is a compact add-on board representing the ADC/DAC combo solution.
Arduino Mega Click Shield is an extension for Arduino Mega and any other boards that share its pinout.
Arduino Portenta Machine Control adds Industrial IoT capabilities to standalone industrial machinery.
The design of the I2C to SPI Click is based around two SC18IS602B, an I2C-bus to SPI bridge from NXP.