Track My Order
Frequently Asked Questions
International Shipping Info
Send Email
Jump to Subcategory:
MIKROE Flash Click is 8,388,608 bits (8 Mbit) on a Click board™, organized into 1,048,576 bytes (1 MB).
ADC 4 Click is an advanced analog to digital multichannel converter.
RS485 Isolator 2 Click features ADM2867E a 5.7 kV rms signal and power isolated full duplex RS-485 transceiver.
RS485 4 Click offers an UART to RS485 signal conversion, featuring the ADM2795E specialized IC with the complete galvanic iso…
The mikroBUS Cape is an extension for BeagleBone Black, the popular low-cost development platform running Linux.
CAN FD Click features TLE9252V high speed CAN network transceiver from Infineon.
CAN FD 6 Click as its foundation uses the TCAN4550, a CAN transceiver that supports CAN and CAN FD protocols.
V to Hz 3 Click is a compact add-on board that converts an analog voltage input signal into a specific frequency pulse wave s…
MIKROE Current Click is an add-on board used for measurement of electric current.
Expand 8 Click is a compact add-on board that contains a multi-port I/O expander with bi-directional input/outputs.
MIKROE I2C Isolator Click carries ISO1540, a low-power, bidirectional isolator compatible with I2C interfaces.
MIKROE CAN Bus Click is a compact add-on board that provides a link between the CAN protocol controller and the physical wire…
XPRO-Adapter Click is an adapter board for connecting Microchip Xplaned Pro expansion boards with hundreds of mikroBUS™ bas…
ADC 19 Click is a compact add-on board that contains a high-performance data converter.
ISO 9141 Click is a compact add-on board that contains a monolithic bus driver with ISO 9141 interface.
CAN SPI Click 3.3V is an accessory board in mikroBUS™ form factor.
EEPROM 5 Click is a compact add-on board that contains the highest-density memory solution.
MIKROE Expand 9 Click is a compact add-on board that contains a multi-port I/O expander.
EEPROM 3 Click provides 2 Mbit (2,097,152 bits) of Electrically Erasable Programmable Read Only Memory, organized in bytes.
V to HZ Click is a device that converts an analog voltage input signal into a pulse wave signal of a certain frequency.
MIKROE UART I2C/SPI Click is an all-in-one solution which allows ESD-protected RS-232 connectivity to any embedded applicatio…
nvSRAM 2 Click is a compact add-on board that contains the most reliable nonvolatile memory.
MIKROE FRAM Click is a Click board™ that carries a ferroelectric RAM module.
This is a compact board that contains I2C to CAN-physical transceiver, which extends a single I2C bus through harsh or noisy …
ADC 11 Click is a compact add-on board that contains a high-performance data converter.
SPI Isolator 2 Click is a compact add-on board that contains a digital isolator optimized for a serial peripheral interface.
AD-SWIO Click is a quad-channel software configurable input/output solution based on AD74412R.
DAC 7 Click carries the AD5624R, a low-power four-channel, 12-bit buffered Digital-to-Analog Converter.
4D - Display Click is an adapter Click board™ that offers a mikroBUS™ interface for controlling 4D Systems gen4 Series in…
MIKROE ADC Click carries the MCP3204 12-bit Analog-to-Digital converter.
The MASWSS0115 is ideally suited for applications where a very small size and low cost are required.
MIKROE Unique ID Click carries DS2401, an silicon serial number IC. It’s a low cost solution for providing a unique registr…
The Click communicates with the target MCU through the UART interface and runs on a 3.3V power supply.
Adapter Click is a breakout board which simplifies connection of add-on boards with IDC10 headers to mikroBUS™ socket.
Waveform 4 Click is a compact add-on board that represents a high-performance signal generator.
MIKROE mikroProg for STM32 is a fast USB 2.0 programmer and hardware debugger based on ST-LINK v2.
DAQ 3 Click is a compact add-on board representing a precision data acquisition solution.
MIKROE SPI Isolator Click carries the ADuM4154 5kV digital isolator optimized for a serial peripheral interface (SPI).
USB to I2C Click is an adapter add-on board with a general-purpose USB master to I2C/UART serial interface.
I2C Extend 2 Click is a compact add-on board suitable for I2C communication bus extension.
ADC 12 Click is a compact add-on board that contains a fully-featured, general-purpose analog-to-digital converter.
EVE Click is a display controller board in mikroBUS™ form factor.
Secure 7 Click carries the ATECC608A cryptographic coprocessor with secure hardware-based key storage, from Microchip.
DAC 2 Click carries LTC2601, a 16-bit digital-to-analog converter from Analog Devices, along with voltage output screw termin…
EEPROM2 Click provides 2 Mbit (2,097,152 bits) of Electrically Erasable and Programmable Read Only Memory, organized in bytes…
MIKROE GainAMP 3 Click is a compact add-on board that contains a 4-channel programmable gain amplifier.
ADC 8 Click is a high precision, low-power, 16-bit analog-to-digital converter (ADC), based around the ADS1115 IC.
MIKROE SRAM Click lets you add 1 Mbit of additional SRAM memory to your devices, via the 23LC1024 chip.
