Track My Order
Frequently Asked Questions
International Shipping Info
Send Email
added to your cart!
This is the SparkFun Vernier Interface Shield, a simple add-on to give your Arduino the capability to interface with Vernier …
Commonly used to attach WiFi, Bluetooth, or nRFxxx based devices to a 2.4GHz antenna.
This the IQAudio XLR interface board from Raspberry Pi. This board is perfect for those wanting to work with peripheral with …
MIKROE SPI Isolator 3 Click is a compact add-on board that contains a digital isolator optimized for a serial peripheral inte…
USB UART Click carries the FT232RL, a USB to UART interface IC, from FTDI.
I2C MUX 7 Click is a compact add-on board representing a bidirectional selector dedicated to applications with I2C slave addr…
The RS485 5 Click is a Click board™ equipped with the MAX485, low-power, slew-rate-limited transceiver for RS-485 and RS-42…
4D - Display Click is an adapter Click board™ that offers a mikroBUS™ interface for controlling 4D Systems gen4 Series in…
RS485 Click 3.3V is a RS422/485 transceiver Click board™.
MCP2518FD Click is a compact add-on board representing a complete CAN solution used as a control node in a CAN network.
UART 1-Wire Click is used to convert standard UART or RS232 signals into 1-Wire® signals.
LLC I2C Click can be utilized as the level converter for logic signals, which makes it a very useful Click board™.
MCP2517FD Click is a compact add-on board representing a complete CAN solution used as a control node in a CAN network.
Expand 4 Click carries TPCIC6A595, a chip that combines an 8-bit serial-in, parallel-out shift register with an 8-bit D-type …
RS485 6 Click offers a half-duplex RS-485 communication with integrated surge protection.
MCP251863 Click is a compact add-on board representing a complete CAN solution used as a control node in a CAN network.
RS232 2 Click performs full RS232 to UART signal conversion, allowing both 3.3V and 5V operation.
RS485 3 Click is an RS422/485 transceiver Click board™, which can be used as an interface between the TTL level UART and th…
The main component of the RS-232 Click is the MAX3232, a 3.0V to 5.5V low power, true RS-232 transceiver, from Maxim Integrat…
EVE Click is a display controller board in mikroBUS™ form factor.
Terminal 2 Click is an adapter Click board™ used as a mikroBUS™ socket expansion board.
USB to I2C Click is an adapter add-on board with a general-purpose USB master to I2C/UART serial interface.
MIKROE CAN Bus Click is a compact add-on board that provides a link between the CAN protocol controller and the physical wire…
I2C Extend Click is a compact add-on board for applications that require extending the I2C communication bus over a long dist…
iButton Click - is an iButton™ probe Click board™.
TFmini Click is an adapter Click board™ used to interface a compatible ToF (Time of Flight) LiDAR sensor with the host MCU.
RS485 2 Click is an RS422/485 transceiver Click board™, which can be used as an interface between the TTL level UART and th…
ETH Click is an accessory board in mikroBus™ form factor.
This bundle gives you everything you need to take high-accuracy distance measurements.
RS232 SPI click two ICs - MAX3100 and MAX3232. MAX3100 serves as UART interface to the SPI/MICROWIRE compatible interface con…
RS485 Click 5V is an RS422/485 transceiver Click board™.
1-Wire I2C Click carries the DS28E17 1-Wire-to-I2C master bridge from Analog Devices.
USB to I2C 2 Click is a compact add-on board that contains a general-purpose USB to I2C serial interface.
Expand 13 Click is a compact add-on board that contains a multi-port I/O expander.
USB UART 3 Click is a versatile and feature-rich USB to UART interface from Silicon Labs.
USB UART 2 Click provides USB isolation and carries the ADUM4160BRWZ USB port isolator.
Riverdi Click is an adapter for connecting Riverdi TFT displays to a mikroBUS socket.
Expand 12 Click is a compact add-on board that contains a multi-port I/O expander.
EtherCAT Click as its foundation uses the LAN9252, a 2-port EtherCAT device controller with dual integrated Ethernet PHYs fro…
CAN FD 6 Click as its foundation uses the TCAN4550, a CAN transceiver that supports CAN and CAN FD protocols.
Skywire™ Click is an adapter Click, which hosts NimbeLink/Skywire™ cellular modems (using stacking headers) to MikroElekt…
I2C 1-Wire Click carries DS2482-800, a “bridge device” that performs bidirectional conversions between I2C controller and…
I2C Extend 2 Click is a compact add-on board suitable for I2C communication bus extension.
SPI Isolator 2 Click is a compact add-on board that contains a digital isolator optimized for a serial peripheral interface.
ISO 9141 Click is a compact add-on board that contains a monolithic bus driver with ISO 9141 interface.
Expand 14 Click is a compact add-on board that contains a multi-port I/O expander.
The Dual LIN Click is a Click board™ based on the TLE7268SKXUMA1, a Dual LIN transceiver from Infineon.
BroadR-Reach Click brings the industry grade communication standard to the mikroBUS™, which is built to be used in an Ether…
