Track My Order
Frequently Asked Questions
International Shipping Info
Send Email
added to your cart!
[RTC](http://en.wikipedia.org/wiki/Real-time_clock) stands for real time clock folks. The DS3234 is a low-cost, extremely acc…
This is a 40-pin surface mount FPC (Flat Printed Circuit) connector.
1.0M Ohm, 1/4th Watt, +/- 5% tolerance PTH resistor.
PCB mount clip to hold a AA battery. Sold in single units, you'll need two. These work great for small, low power application…
1.0M Ohm, 1/4th Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and perf boards.We've opted for a new and …
Huge 10mm through-hole LEDs. Mood-light an entire wall!
These red and black jumper wires can be used for pretty much everything including breadboards, Arduinos, and any 0.1in pitch …
1/6th Watt, +/- 5% tolerance PTH resistor.
This is a 100 kOhms, 1/10W, ±1% tolerance SMD resistor.
This is a 330 Ohms, 1/10W, ±1% tolerance SMD resistor.
This is a handy cable for connecting a six pin GHR-06V type locking connector to breadboard friendly male pins.
These LR44 button cell batteries are fairly common but it can be hard to keep them around. They fit our digital calipers, so …
The Phillips #00 screw is the most commonly used fastener in the internals of consumer electronics, game consoles, laptops, P…
Self-fusing silicone electrical tape is the perfect way to insulate and protect your freshly-soldered splice.
This is a 470 Ohms, 1/10W, ±1% tolerance SMD resistor.
The Compute Module 4 packs all the best features of the Raspberry Pi Model B 4 into a more favorable form-factor for embedded…
This is a basic surface mount JST-SH 2-pin right angle connector.
This bundle includes our 15 most useful fixed blade screwdrivers.
This is a 680 Ohms, 1/10W, ±5% tolerance SMD resistor.
This is a 2.7 kOhms, 1/10W, ±1% tolerance SMD resistor.
The Segger J-Link On Board microcontroller is based on the ARM® Cortex™- M4.
The MicroMod DIY Carrier Kit includes five M.2 connectors, screws, and standoffs so that you can get all the parts you may ne…
The next iteration of the Raspberry Pi single board computer featuring a 64-bit quad-core Arm Cortex-A76 processor running at…
This is a 4.7 kOhms, 1/10W, ±1% tolerance SMD resistor.
The HMC6343 is a fully integrated high end electronic compass module that can compute and give you a heading direction that 
These nylon standoffs are 3/8" long and tapped for a 4-40 screw.
This is an XBee Pro module with an RP-SMA connector. You also get a built in microcontroller so it can be programmed using Mi…
This is a 715 Ohms, 1/10W, ±1% tolerance SMD resistor.
This is a 240 Ohms, 1/10W, ±1% tolerance SMD resistor.
The LN298 is a high voltage, high current, dual full-bridge motor driver designed to accept standard TTL logic levels and dri…