Jumper Wires Premium 6" Mixed Pack of 100

This is a SparkFun exclusive! These are 155mm long, 26 AWG jumper wires. Multiple jumpers can be installed next to one another on a 0.1" header. Comes as 1 package of one hundred jumpers (colors shown), 50 pieces male-to-male and 50 pieces female-to-female.

  • 6" long (155mm)
  • 26 AWG


Looking for answers to technical questions?

We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.

  • Nakor / about 13 years ago / 7

    This is great. Honestly though, picking these up as a starter pack I would have preferred 50 male to male, 25 female to female, and 25 female to male. I realize I can just combine them to get that but I don't usually want a 12" when a 6" will do.

  • Shmames / about 12 years ago / 4

    I third the wish that the pack included M/F.

  • phishinphree / about 13 years ago / 4

    One more wishing for some m/f in the mix.

  • pstemari / about 14 years ago / 4

    Some M/F's in here would be good. You can string a M/M to a F/F, but that's a little awkward.

    • Member #735 / about 13 years ago / 4

      Do this please. 6" 50 M/M 50 M/F is what I'd be buying right now were that configuration available.

  • These are 26AWG for anyone wondering.

  • Volatile Interface / about 10 years ago / 1

    I wish that you guys would carry a 6" pack of the same wires.

  • lugovoi / about 10 years ago / 1

    M/F would be great.

  • Member #376120 / about 11 years ago / 1

    You can just push in one of those breakaway headers into one side though couldnt ya?

  • Digger / about 15 years ago / 1

    Any chance of just selling F/F and M/M instead of the mix? I really only need the F/F. If you did I would have already placed two orders!

Customer Reviews

3.8 out of 5

Based on 4 ratings:

Currently viewing all customer reviews.

Don't EVER run out of these jumper wires!

I use these all the time for both the Arduino and Rpi and they have made my life so much easier.

IOIO kit

I bought a IOIO kit. The ioio board dos not fit the plastic board, and the transformer is fitted with a connection not usable in the Netherlands/EU. Not a very satisfying buy.

Jumper all the things!

Whether you need to make connections between female headers, or male pins, this bundle has you covered. Male to male? Covered. Female to female? Covered. Male to female? Covered. Nicely put together and a pretty good length for most projects.


Even after removing the black plastic fittings to tighten the metal tabs, the female terminals are too loose and slide off pins too easily. The male terminals have a similar issue as they slide out of female pin ports. Unless you plan on cutting, stripping, and just soldering these wires up they're pretty much useless.