Beaglebone Black Enclosure - Black Plastic

The Beaglebone Black is a great credit-card-sized development platform with a fast growing community, why would you not want to keep your board safe and sound inside this black opaque plastic enclosure? These cases protect your Beaglebone Black from things like rogue wires that might short it out while still allowing full access to the board! Simply snap the BBB into the bottom half of the enclosure, then snap the two sides together.

As you may have noticed, these Beaglebone enclosures are actually an opaque black color. The enclosures are perfect for blending your enclosed BBB into a black surface, giving your project a sleeker look.

The enclosure provides slots to access each header, USB ports, power jack, ethernet jack, power buttons, MicroHDMI, MicroSD card, as well as feet and vents to ensure the board gets proper cooling and slide-in wall mounting slots. All of the status LEDs on the Beaglebone Black are visible through the case thanks to light pipes embedded in the design. This is a really durable case that will do a great job protecting your Beaglebone Black!

  • 10 x 6.5 x 3 cm



Looking for answers to technical questions?

We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.

  • Frotz / about 10 years ago * / 2

    This along with the Pi and Uno cases look wonderful. Would you consider making taller versions of these for Pi and BBB with shield/cape installed? I notice you already have something like this for the Uno. For a project that's ready to deploy, I don't want stuff needlessly exposed.

  • Member #115576 / about 9 years ago / 1

    I second Frotz. We need a case like this that holds the BBB and two capes.

  • chrwei / about 10 years ago / 1

    will this also fit the original white beaglebone?

Customer Reviews

No reviews yet.