SparkFun Small Parts Kit

Get all the small components you may need all in one little box! The SparkFun Small Parts Kit includes all the bric a brac pieces that are valuable for hackers and DIYers to have available in their work bench. There are quite a bit of bits and bobs with this kit so make sure to check the Includes tab above to see everything that comes in the box!

FYI: It is important to point out that this kit WAS available for a limited time for our "Four Weeks of Free" event. It was priced accordingly due to the fact that we only had a limited amount of stock available. Unfortunately, the promotion is currently sold out and is no longer available to be added to your cart for free.
  • 1x Breadboard - Mini Modular (Green)
  • 1x Green LED - 3mm
  • 1x Yellow LED -3mm
  • 1x Red LED - 3mm
  • 30x Jumper Wires Standard 7in. M/M - 30 AWG
  • 10x 10pF Capacitor
  • 10x 22pF Capacitor
  • 10x 100pF Capacitor
  • 10x 1nF Capacitor
  • 10x 10nF Capacitor
  • 25x 100nF Capacitor
  • 10x 1µF Capacitor
  • 10x 10µF Capacitor
  • 10x 100µF Capacitor
  • 10x 1000µF Capacitor
  • 25x NPN Transistor - 2N3904
  • 25x PNP Transistor - 2N3906
  • 10x N-channel MOSFET - 5LN01SP
  • 10x P-Channel MOSFET - 5LP01SP
  • 20x Silicon Diode - 1N4148
  • 20x Power Diode - 1N4004
  • 5x Small Signal Diode - 1N4148
  • 5x Diode Rectifier - 1N4001
  • 5x Voltage Regulator - LM317LZ
  • 5x Voltage Reference - TL431A

SparkFun Small Parts Kit Product Help and Resources

Core Skill: Electrical Prototyping

If it requires power, you need to know how much, what all the pins do, and how to hook it up. You may need to reference datasheets, schematics, and know the ins and outs of electronics.

2 Electrical Prototyping

Skill Level: Rookie - You may be required to know a bit more about the component, such as orientation, or how to hook it up, in addition to power requirements. You will need to understand polarized components.
See all skill levels


Customer Comments

  • Handling small, delicate parts is the other electronics skill that must be mastered. The Component Casualty Rate is one of the hidden secrets (and costs) of learning electronics. This kit is the stuff that often gets lost, broken, burnt up, or you forgot/didn’t know to order in the first place. The free-with-order offer shows Sparkfun loves those who are making the effort to learn. They want you to succeed now and go on to build really, really cool stuff. There are fewer days of Summer remaining than you realize, so equip yourself for completions and success.

  • Bryan M / last week / 2

    This kit consists of the Capacitor Kit, Discrete Kit, jumper wires, mini breadboard, 3 LEDs and a few diodes. For those (like me) who were hoping that the free “Small Parts Kit” would turn out to be the SF Beginner Kit, the basic difference is this kit has greater quantities with less variety. You get almost triple the number of capacitors (including 10 of the 1000uF, of which the Beginner Kit has none), 7 times the number of transistors (including 20 MOSFETS lacking from the Beginner Kit), and 5 times the number of diodes. For that you give up the photocell, 555 timer, op amps, push buttons, switches, headers, 7-segment display and the parts box. For me personally, I’d rather have the beginner’s kit, since I already have the capacitor kit and am lacking in the random buttons and switches department, but at current prices it’s a $24.35 value and I’m getting it for free so I guess I can’t complain.

  • That’s a lot of markup. You can buy all the parts in the small parts kit, in single unit quantities, for about $11 over at Tayda. And the Tayda stock is apparently not limited like it is here, you can get as many as you want.

    • It’s priced to make it pointless to buy it without just going through the free deal. There’s no intent to sell this kit outright.

    • I would agree, except, read the “FYI:” section above at the end of the description.

Customer Reviews

No reviews yet.