Polarized connectors and headers for your perf board/PCB projects. Use these connectors for power connections or any sensor/general connection to prevent users from connecting the peripheral incorrectly or reversed.
This is for the female housing. Be sure to order the mating header and crimp pins!
Pins have standard 0.1" spacing.
PRT-08097 only has the 4-pin Female Housing. The picture is confusing. Try looking at this picture => [ https://drive.google.com/open?id=0B0jwgLkjMWzDQ2d0NkFrMnJndDg ].
You will still need to order the crimp pins [ https://www.sparkfun.com/products/8100 ] and 4-pin male header polarized connector [ https://www.sparkfun.com/products/8231 ]. Make sure that you are using crimp tool [ https://www.sparkfun.com/products/13193 ] for the female housing.
No reviews yet.
Looking for answers to technical questions?
We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.
Log in or register to post comments.
any idea when this is coming back into stock?
What's the story on getting these back in stock? They have been out for too long and I, for one, am holding off on a larger order until the 4-pin housings are back.