Polarized Connectors - Header (4-Pin)

Polarized connectors and headers for your perf board/PCB projects. Use these connectors for power connections or any sensor/general connection to prevent users from connecting the peripheral incorrectly or reversed.

This is for the male header. Be sure to order the housing and crimp pins!

Pins have standard 0.1" spacing.

Polarized Connectors - Header (4-Pin) Product Help and Resources

1 of 1 found this helpful:

4-pin Male Header Only

PRT-08231 only has the 4-pin Male Header. The picture is confusing. Try looking at this picture => [ https://drive.google.com/open?id=0B0jwgLkjMWzDWVpRa1g0UUIzT1k ].

You will still need to order the crimp pins [ https://www.sparkfun.com/products/8100 ] and 4-pin female housing polarized connector [ https://www.sparkfun.com/products/8097 ] . Make sure that you are using crimp tool [ https://www.sparkfun.com/products/13193 ] for the female housing.

Core Skill: Soldering

This skill defines how difficult the soldering is on a particular product. It might be a couple simple solder joints, or require special reflow tools.

2 Soldering

Skill Level: Rookie - The number of pins increases, and you will have to determine polarity of components and some of the components might be a bit trickier or close together. You might need solder wick or flux.
See all skill levels


Looking for answers to technical questions?

We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.

Customer Reviews

No reviews yet.