Polarized Connectors - Housing (4-Pin)

Polarized connectors and headers for your perf board/PCB projects. Use these connectors for power connections or any sensor/general connection to prevent users from connecting the peripheral incorrectly or reversed.

This is for the female housing. Be sure to order the mating header and crimp pins!

Pins have standard 0.1" spacing.

Polarized Connectors - Housing (4-Pin) Product Help and Resources

Working with Wire

February 8, 2013

How to strip, crimp, and work with wire.

4-pin Female Housing Only

PRT-08097 only has the 4-pin Female Housing. The picture is confusing. Try looking at this picture => [ https://drive.google.com/open?id=0B0jwgLkjMWzDQ2d0NkFrMnJndDg ].

You will still need to order the crimp pins [ https://www.sparkfun.com/products/8100 ] and 4-pin male header polarized connector [ https://www.sparkfun.com/products/8231 ]. Make sure that you are using crimp tool [ https://www.sparkfun.com/products/13193 ] for the female housing.


Looking for answers to technical questions?

We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.

  • BeanBandit / about 12 years ago / 1

    any idea when this is coming back into stock?

  • zbedell / about 14 years ago / 1

    What's the story on getting these back in stock? They have been out for too long and I, for one, am holding off on a larger order until the 4-pin housings are back.

Customer Reviews

No reviews yet.