Parts may need to have a copper pad soldered onto them to make contact with play-dough easier. Although copper tape is EVEN easier because you don't have to clean the copper pads afterwards. Just attach copper tape to the ends of all leads and throw them away at the end of the workshop. Otherwise you will need to be careful of oxidization, we find the LEDs fall apart after a couple sessions without the tape.
Product | Subtotal | Qty | |
---|---|---|---|
Diffused LED - Red 10mm
COM-10632 |
6 | 10 | |
Diffused LED - Green 10mm
COM-10633 |
6 | 10 | |
Diffused LED - Yellow 10mm
COM-10634 |
6 | 10 | |
Diffused LED - Blue 10mm
COM-10635 |
6 | 10 | |
Toy DC Motor with Leads
ROB-09608 |
9.5 |
10
Cannot be ordered at this time. |
|
Battery Holder - 4xAA Square
PRT-00552 |
42 | 20 | |
Mini Photocell
SEN-09088 |
16 | 10 | |
Copper Tape - 2" (50ft)
PRT-11081 |
18.5 | 1 | |
Total: 110 |