Track My Order
Frequently Asked Questions
International Shipping Info
Send Email
Jump to Subcategory:
added to your cart!
The Shapeoko 4 XXL is a 3-axis CNC Machine kit that allows you to create your 2D and 3D designs out of non-ferrous metals, ha…
The Shapeoko 4 XL is a 3-axis CNC Machine kit that allows you to create your 2D and 3D designs out of non-ferrous metals, har…
This flat mill is perfect for roughing or machining flat or prismatic parts.
This is a class 10, 16GB, micro SDHC card that has been pre-installed with the NOOBS operating system for the Raspberry Pi.
The Qwiic Transparent OLED HUD is SparkFun's answer to all of your futuristic transparent HUD needs.
The HMC6343 is a fully integrated high end electronic compass module that can compute and give you a heading direction that 
**Note:** This camera case does not currently fit the [Raspberry Pi Camera Module V2](https://www.sparkfun.com/products/14028…
This is an XBee Pro module with an RP-SMA connector. You also get a built in microcontroller so it can be programmed using Mi…
The SparkFun GNSS Chip Antenna Evaluation Board makes it easy to test out various sized GPS antennas and geometries.
With the SparkFun Cryptographic Development kit you will get everything you need to learn the fundamentals of cryptographic a…
The SparkFun gator:microphone is a micro:bit Accessory Board that integrates a microphone into SparkFun's gator:bit series of…
The EasyVR 3 Plus Shield is a voice recognition shield for Arduino boards integrating an EasyVR module.
The RED-V Thing Plus from SparkFun is a low-cost, Arduino-compatible development board featuring the Freedom E310 which bring…
This flat mill from Carbide 3D is perfect for roughing or machining flat or prismatic parts.
These 0.1" spaced female headers are perfect for building your own Raspberry Pi B add-on modules. These PTH headers are arran…
The Double Backlit user interface is like the Single Backlit Button, but twice the fun!
The C-Curve Bus is perfect for connecting two 0.15in buses together at a wide angle.
Bare Conductive's Electric Paint Pen is just like any other water-based paint... except that it's electrically conductive!
The Nomad Endmill Starter Pack contains the most popular endmills to get you started on a variety of projects for your Nomad …
The Shapeoko Endmill Starter Pack contains the most popular endmills used on the Shapeoko to get you going on a variety of pr…
Feeling Fancy? The SparkFun Top pHAT is the fundamental machine learning add-on for Raspberry Pi or any 2x20 GPIO SBC!
Arduino AKX00015 CTC Go Kit is an educational program with several modules that can be combined to teach different STEAM subj…
The Binho Qwiic Interface Board makes it easy for you to interface your Binho Nova host adapter with up to four strings of Qw…
The MicroMod DIY Carrier Kit includes five M.2 connectors, screws, and standoffs so that you can get all the parts you may ne…
The Compute Module 4 packs all the best features of the Raspberry Pi Model B 4 into a more favorable form-factor for embedded…
Great for detecting motion in a small area & optimized for small movements to offer motion-sensing options for continuously p…
Great for detecting motion in a small area and optimized for small movements to offer motion-sensing options for battery powe…
This is a stereo amplifier kit designed to make use of the [STA540](http://www.sparkfun.com/commerce/product_info.php?product…
This is a breakout board for Honeywell's HIH-4030 humidity sensor. The HIH-4030 measures relative humidity (%RH) and delivers…
The NVIDIA® Jetson Nanoâ„¢ 2GB Developer Kit delivers the performance to run modern AI workloads at a small form factor, low…
The Compute Module 3+ Development Kit is made for developing industrial applications with CM3+, CM3+/Lite, CM3, CM3 Lite, and…
The Raspberry Pi Compute Module 3+ contains the guts of a Raspberry Pi 3 Model B+ with 32GB of eMMC Flash memory.
The Raspberry Pi Compute Module 3+ contains the guts of a Raspberry Pi 3 Model B+ with 16GB of eMMC Flash memory.
Utilize this kit to turn your Jetson Nano into a mobile machine with things like object following, collision avoidance via th…
The release of the Jetson Nanoâ„¢ 2GB Developer Kit, NVIDIA® empowers developers, researchers, students, and hobbyists to ex…
The Argon NEO RPi 4 Case is a plastic and aluminum enclosure that properly protects and cools your Pi 4 without obstructing a…
MC Etcher is a diamond drag bit. It is perfect for fine line engraving on composites, metals, and glass.
If you're looking for a fully-featured Raspberry Pi 4 case, then look no further than the Argon ONE Pi 4 Raspberry Pi Case.
These flat mills are perfect for roughing or machining flat or prismatic parts.