Track My Order
Frequently Asked Questions
International Shipping Info
Send Email
Jump to Subcategory:
We rebooted this amazing product. See our new [BlueSMiRF v2](https://www.sparkfun.com/products/24113). The BlueSMiRF is th…
The Intel® Edison is an ultra-small computing platform that will change the way you look at embedded electronics. Each Ediso…
This is a 4.5" connector cable that interfaces H.FL RF connectors to regular SMA connectors.
The SparkFun Inventor's Kit for Photon is a great way to get started in the fresh IoT world and WiFi development. The SparkFu…
The ESP32 LoRa 1-CH Gateway combines an ESP32 -- a programmable microcontroller featuring both WiFi and Bluetooth radios -- w…
Bluetooth Click communicates with the target board MCU through UART interface and is designed to run on 3.3V power supply onl…
The Mi-Light Remote Control is a 2.4GHz RF LED accessory that can change the color and dim non-addressable LED strips attache…
The Helium Ethernet Starter Kit for Arduino includes everything needed to easily give your embedded devices secure, long-rang…
The Arduino MKR1000 is a powerful board that combines the functionality of an Arduino Zero and a handy WiFi shield. This thin…
Venus638FLPx is a high performance, low cost, single chip GPS module targeting mobile consumer and cellular handset applicati…
The SparkFun Raspberry Pi Zero W Camera Kit provides you with a pan/tilt camera controlled via a Raspberry Pi Zero W. This ki…
The Omega2 IoT computer is one of Onion’s Linux-based WiFi development boards designed to enable makers of all skill levels…
The GPS Expansion Board for the Onion Omega is a USB-based expansion that allows your Omega to pinpoint its location using bo…
This ESP32 Thing Plus SkeleBoard with U.FL allows you to get started with IoT ideations while still enjoying all the amenitie…
This is the RGB/Button Shield for RFduino, a small add-on board for the RFduino DIP module. Just as its name suggests, this l…
GSM 3 Click is a complete quad-band GSM cellular network communication solution.
The CC3000 from TI (Texas Instruments) is a self-contained wireless network processor that makes incorporating internet conne…
3G SARA Click is a versatile cellular network communication solution, featuring the compact 3.75G UMTS/HSPA SARA U-201 modem …
The BlackBoard Artemis ATP is affectionately called 'All the Pins!' The Artemis module has 48 GPIO and this board breaks out …
The LightBlue Bean+ is an Arduino-compatible development board from PunchThrough Design that you program wirelessly using Blu…
The AST-CAN485 WiFi Shield provides a way for working wirelessly in automation, an environment famous for being noisy and unf…
The ESP32 WROOM MCU Module with Chip Antenna is a powerful, generic WiFi+BT+BLE MCU module that targets a wide variety of app…
The BLE Nano v2 from RedBearLab is the smallest Bluetooth 4.2/5.0 Low Energy (BLE) development board on the market. With the …
The BLE Nano v2 from RedBearLab is one of the smallest Bluetooth 4.2/5.0 Low Energy (BLE) development boards in the market. A…
This product has been replaced with a fancy red version. Everything is the same except the [red version](https://www.sparkfun…
The Particle Xenon is a low-cost mesh-enabled development board.
This product was retired with the introduction of the new and improved [Version 2 SAMD21 ProRF 1W](https://www.sparkfun.com/p…
The WiFi IR Blaster is designed to connect all of your legacy IR-controlled devices to a WiFi network -- exposing them to a n…
This Diagnostic Accessories Pack provides you with all the additional parts needed to unlock the the full potential of your H…
The black version of this board has been retired but the board has gone red! We upgraded to the SAMD21 on the [SparkFun Pro R…
The HX1 is a narrow band radio transmitter module for use in long range data transfer applications at ranges up to 10km.
Qwiic RF is a packet radio system that's designed for sending short packets of sensor data from one Qwiic bus to another. Mes…
LTE Cat.1-EU Click is a compact add-on board containing a low-power LTE-IoT connectivity solution.
Magnet mount antenna for GPS modules operating at 3V. Designed for use with automobiles - the magnet will hold the antenna in…
The SparkFun Pro RF is a LoRa®-enabled wireless board that marries a SAMD21 and a long-range RFM95W to make a compact and ea…
The SparkFun IoT Starter Kit with Blynk Board is a great way to gain a solid introduction to the world of IoT technology with…
The SparkFun Edge 2 Development Board powered by TensorFlow is perfect begin using voice recognition without relying on the s…
The nRF24L01 module is the latest in RF modules from SparkFun. This module uses the 2.4GHz transceiver from Nordic Semiconduc…
3G-EA Click is a versatile cellular network communication solution, featuring the compact 3G UMTS/HSPA Quectel UG95 module.
This board went red! Buy the fancy one [here](https://www.sparkfun.com/products/20168). The SparkFun ESP32 Thing Plus C is…
The BLE 7 Click is a Click board™ witch provide BT/BLE connectivity for any embedded application.
M-BUS RF 4 Click is a mikroBUS™ add-on board with a MIPOT 32001324 RF wireless transceiver.
The AS7221 Smart Lighting Integration Kit (SLIK) is a complete color tuning luminaire reference design solution, built aroun…
If you need maximum distance for your LoRa project you need this incredibly durable, outdoor antenna with 6dBi gain. This 915…
The SparkFun GPS-RTK2 is a powerful breakout for the ZED-F9P module. The ZED-F9P is a top-of-the-line module for GNSS & GPS s…
This starter kit has everything you need to get started with the ESP8266 Thing Dev board. Solder on some headers (iron not i…
The 1Sheeld+ is an IoT shield for Arduino with a built-in BLE module that gives your Arduino the capability to connect to you…
The BlackBoard Artemis takes the incredibly powerful Artemis module from SparkFun and wraps it up in an easy to use and famil…