Common parts such as LEDs, resistors, 0.1" headers for LEDs, and the motor driver (already owned) were omitted from this list. Jumper wire kit optional, but would be great for breadboarding the prototype. 2mm socket (non-standard) will be cut down to 4 sockets for the camera pins. (10 pin was the only 2mm header available) May need male header pins if they are not included with the camera.
Product | Subtotal | Qty | |
---|---|---|---|
JST Right-Angle Connector - Through-Hole 2-Pin
PRT-09749 |
1.05 | 1 | |
Jumper Wire Kit - 140pcs
PRT-00124 |
6.5 | 1 | |
2mm 10pin XBee Socket
PRT-08272 |
1.15 | 1 | |
SparkFun Level Translator Breakout - PCA9306
BOB-11955 |
7.5 |
1
Cannot be ordered at this time. |
|
Arduino Stackable Header Kit - R3
PRT-11417 |
1.75 | 1 | |
SparkFun microSD Shield
DEV-12761 |
17.5 | 1 | |
Arduino Uno - R3
DEV-11021 |
27.6 | 1 | |
Total: 63.05 |