These are all of the parts you need to build a ATtiny Flower Pot. Instructions found at Instructables . More info at my website peterfoxflick.com *Please note that in the instructions I use a 4.7uF capacitor. The circuit at gardenbot.com has a 47uF capacitor. I couldn't find either here at sparkfun.com so I put in a 10uF capacitor. Good Luck PS. You also need a flowerpot and a plant
Product | Subtotal | Qty | |
---|---|---|---|
AVR 8 Pin 20MHz 8K 4A/D - ATtiny85
COM-09378 |
3.5 | 1 | |
Copper Tape - 5mm (50ft)
PRT-10561 |
3.95 | 1 | |
Tiny AVR Programmer
PGM-11801 |
17.5 | 1 | |
Resistor Kit - 1/4W (500 total)
COM-10969 |
8.95 | 1 | |
Electrolytic Decoupling Capacitors - 10uF/25V
COM-00523 |
0.5 | 1 | |
Battery Holder 2xAAA with Cover and Switch
PRT-09543 |
1.5 |
1
Cannot be ordered at this time. |
|
Total: 35.9 |