http://arduino.cc/en/Main/Standalone
I use a standard circuit which has the 7805, a 10uF on Input and 1uF on output. Most of these different capacitor setups will work most of the time.
Product | Subtotal | Qty | |
---|---|---|---|
AVR 28 Pin 20MHz 32K 6A/D - ATMega328P
COM-09061 |
3.95 |
1
Cannot be ordered at this time. |
|
Crystal 16MHz
COM-00536 |
1.05 | 1 | |
Capacitor Ceramic 22pF
COM-08571 |
0.6 | 2 | |
Voltage Regulator - 5V
COM-00107 |
1.05 | 1 | |
Electrolytic Decoupling Capacitors - 10uF/25V
COM-00523 |
1 | 2 | |
Resistor 10K Ohm 1/6th Watt PTH - 20 pack (Sale)
COM-10466 |
0.5 |
1
Cannot be ordered at this time. |
|
Resistor 330 Ohm 1/6th Watt PTH - 20 pack
COM-10465 |
0.5 |
1
Cannot be ordered at this time. |
|
Mini Pushbutton Switch
COM-00097 |
0.45 | 1 | |
LED - Basic Green 3mm
COM-09650 |
0.45 | 1 | |
LED - Basic Yellow 3mm
COM-00532 |
0.45 | 1 | |
ProtoBoard - Rectangle Wired 3"
PRT-08812 |
4.5 |
1
Cannot be ordered at this time. |
|
Capacitor Ceramic 0.1uF
COM-08375 |
0.3 | 1 | |
Total: 14.8 |