Track My Order
Frequently Asked Questions
International Shipping Info
Send Email
Jump to Subcategory:
added to your cart!
The SparkFun Qwiic Dual Solid State Relay is a power delivery board that allows users to switch two AC loads from a low power…
This SparkFun Real Time Clock (RTC) Module is a Qwiic-enabled breakout board for the RV-1805 chipset running at only about 22…
The SparkFun MicroMod Single Pair Ethernet Function Board introduces 10BASE-T1L Two-Wire Ethernet protocol into the SparkFun …
These are addressable 1-meter-long 5V RGB LED strips that come packed with 60 APA102Cs. APA102 LEDs are very similar to WS281…
The Qwiic OpenLog kit includes everything you'll need to get up and running with the Qwiic OpenLog and the Qwiic Ecosystem.
RFM97CW Sub-GHz radio transceivers are ideal for long range wireless applications.
This is a portable, slim, lightweight solar panel charger with 10 watts of power and a standard USB connection port.
This APA102C is the regular, 5050-sized SMD LED version. With a control circuit embedded, the APA102C-5050 is incredibly brig…
Behold, the Hydra! This USB power cable probably looks a lot like something you've hacked together before. We do it all the t…
These 5mm units have four pins - one for each color and a common cathode (the longest pin).
12" long cables terminated with banana plugs, ideal for the micro:bit and gator:bit ecosystems.
The Qwiic MultiStar adds five additional ports to boards that have only one Qwiic port on the I2C bus and can also be added t…
The Espressif ESP32-C3 is the next version of the popular ESP32 Bluetooth and WiFi enabled module.
The gator:log is the perfect data logging tool for your next experiment.
Polarized connectors and headers for your perf board/PCB projects. Use these connectors for power connections or any sensor/g…
This is a breakout board for our non-isolated, [6A DC-to-DC Converter Module](http://www.sparkfun.com/commerce/product_info.p…
We all know that you can never get too many LEDs. Don't worry, we've got you covered. This is a pack of basic red and yellow …
Use this jig to hold your 5mm LEDs while bending the legs over and mount to the side of your board.
You might have seen these cables used in computers. They are typically used to bring USB connections from a motherboard to th…
Here we have some right-angle headers with 40x3 pins. They are break away and will take a bit of effort to break this beast w…
Behold, the Hydra! This USB power cable probably looks a lot like something you've hacked together before.
These are standard 0.1" spaced header pins that can be surface mounted for applications where through-hole pins won't work. T…
This is a simple three wire cable. Each cable is 6" long and is great for jumping from board to board or just about anything …
These are your run-of-the-mill 1/4 Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and other prototyping a…
This is a simple six wire cable. Great for jumping from board to board or just about anything else. There is a 6-pin Molex co…
This is a black plastic bezel, custom made to mate with the silicon rubber pads. Black 1/8" ABS plastic. Using two of these b…
This isn't your ordinary power supply. The Global Power Supply is a 15V, 4.34A power device specifically designed to work wit…
This is a simple 2x8 male PTH header. This header is that you will find commonly used to interface with a basic 8x2 character…
This is a glass ferrule type fuse. It fits great with our 5mm fuse clips. The fuse is rated for 250VAC, up to 500mA. Fuses ar…
This 2x13 shrouded header has the same number and spacing of pins as the Raspberry Pi so you can easily connect via ribbon ca…
The MPU-6050 is a serious little piece of motion processing tech! By combining a MEMS 3-axis gyroscope and a 3-axis accelerom…
This is a USB 3.0 type A to Micro-B 9-pin cable.
These Adam Tech Wall Adapter Cables are terminated with a standard European (CEE 7/7) plug at one end and three insulated spa…
The ZMOD4450 Gas Sensor Module is designed for detecting gases associated with food ripening or rotting.
Huge 10mm through-hole LEDs. Mood-light an entire wall!
This is the very popular RGB combo but in SMD form. These units have four pads with a common anode configuration. Use this on…
This is a simple strip of five signal-conditioning Balun Ember Transformers from Wurth Elektronik that allows you to convert …
This sleek, red 16GB thumb drive has been emblazoned with our SparkFun Electronics logo and our moniker to Start Something!
The BMD-34 series are advanced, highly flexible, ultralow-power multiprotocol modules that enable concurrent Bluetooth 5, Thr…
The Double Backlit user interface is like the Single Backlit Button, but twice the fun!
