Track My Order
Frequently Asked Questions
International Shipping Info
Send Email
added to your cart!
The RV-8803 includes features like a temperature compensated crystal, low power consumption, and improved I2C interface inclu…
This is the SparkFun Real Time Clock (RTC) Module, this little breakout that uses the DS1307 to keep track of the current yea…
This SparkFun Real Time Clock (RTC) Module is a Qwiic-enabled breakout board for the RV-1805 chipset running at only about 22…
MIKROE Clock Gen Click offers an ideal replacement for crystals, crystal oscillators, VCXOs, phase-locked loops, and fanout b…
The gator:RTC is a supplemental data logging tool with a RV-3028 real time clock (RTC) module from Micro Crystal, using a con…
MIKROE Watchdog Click is a compact add-on board that contains a simple countdown timer for a wide variety of applications.
RTC 12 Click is a compact add-on board that measures the passage of time.
Clock Gen 5 Click is a compact add-on board that contains a digital programmable oscillator solution.
RTC 11 Click contains a real-time clock IC designed to maximize battery life and reduce overall battery requirements in weara…
Clock Gen 4 Click is a compact add-on board that contains both a clock generator and a multiplier/jitter reduced clock freque…
RTC 9 click is based on the M41T82, an extreme low power real-time clock/calendar (RTC) module from ST Microelectronics.
Clock Gen 3 Click uses the LTC6904 IC, 1kHz to 68MHz Serial Port Programmable Oscillator from Linear Technology.
[RTC](http://en.wikipedia.org/wiki/Real-time_clock) stands for real time clock folks. The DS3234 is a low-cost, extremely acc…
RTC 10 Click is based on the DS3231M, a low-cost, extremely accurate, I2C real-time clock (RTC) from Analog Devices.
RTC 7 Click is a real time clock module which has an extremely low power consumption.
RTC 16 Click is a compact add-on board that accurately keeps the time of a day.
RTC 8 Click is based on the RV-3028-C7, an extreme low power real-time clock/calendar (RTC) module from Micro Crystal Switzer…
Clock Gen 2 Click is an accurate square wave generator that can generate a clock signal in the range from 260kHz to 66.6MHz.
PLL Click is equipped with the ICS501, a LOCO™ PLL clock multiplier, from Integrated Device Technology.
Timer Click is a mikroBUS™ add-on board with Analog’s DS1682 total elapsed time recorder.
RTC6 Click carries Microchip’s MCP79410 Real-Time Clock/Calendar IC with built-in 64 bytes of battery-backed SRAM an additi…
RTC 5 Click carries MCP79510, a real-time clock/calendar with an SPI interface (mikroBUS™ MISO, MOSI, SCK and CS pins).
RTC4 Click carries DS2417, a real time clock/calendar with a 1-Wire MicroLAN interface and a programmable interrupt for syste…
RTC 3 Click carries BQ32000, a real time clock with an integrated trickle charge circuit.
RTC 17 Click is a compact add-on board that accurately keeps the time of a day.
RTC 18 Click is a compact add-on board that accurately keeps the time of a day.
Clock Gen 6 Click is a compact add-on board representing a digital oscillator solution.
One Shot Click is equipped with the monostable multivibrator with a programmable pulse width of 1μs to 33.6 seconds.
Here is a real time clock based on the DS3234 Real Time Clock IC. The DS3234 is a low-cost, extremely accurate SPI bus real-t…
MIKROE RTC2 Click is an accessory board in mikroBus™ form factor. It features the DS1307 serial real-time clock (RTC).
MIKROE PULSE Click is a pulse generator with an adjustable frequency.
MIKROE RTC 13 Click is a compact add-on board that accurately keeps the time of a day.
MIKROE RTC 14 Click is a compact add-on board that measures the passage of time.