Raspberry Pi - GPIO Shrouded Header (2x13)

$ 0.95 $ 0.24

Added to your shopping cart

This 2x13 shrouded header has the same number and spacing of pins as the Raspberry Pi so you can easily connect via ribbon cable to the low-level peripherals and get hacking! This through-hole header has 26 0.1"-spaced pins and is keyed for polarity.

Check the related items below for the mating cable!

Raspberry Pi - GPIO Shrouded Header (2x13) Product Help and Resources

Core Skill: Soldering

This skill defines how difficult the soldering is on a particular product. It might be a couple simple solder joints, or require special reflow tools.

1 Soldering

Skill Level: Noob - Some basic soldering is required, but it is limited to a just a few pins, basic through-hole soldering, and couple (if any) polarized components. A basic soldering iron is all you should need.
See all skill levels


Looking for answers to technical questions?

We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.

  • Needs a breakout board!!!

    Rank up if you agree!!!

  • jpkelly / about 11 years ago / 3

    Anyone have an Eagle library part for this?

    • haldean / about 11 years ago / 1

      Did you ever find one? I'm looking for one now and coming up empty.

      • haldean / about 11 years ago / 1

        I never found one, so in case others need one as well, I made an Eagle library here: https://github.com/haldean/rpi-gpio-eagle

        @sparkfun: it would be awesome if you could include this in your Eagle library!

        • Add in a pull request on the proper library on our GitHub page and we'll take a look at it! https://github.com/sparkfun. We have a 3D parts library and an Eagle library depending on what parts you want us to add.

  • TomKeddie / about 10 years ago / 1

    Please stock the plug version ie. http://www.adafruit.com/products/1658

Customer Reviews

No reviews yet.