Track My Order
Frequently Asked Questions
International Shipping Info
Send Email
Jump to Subcategory:
The Pimoroni Unicorn HAT is a "shield" for the Raspberry Pi that sports a matrix of 64 (8x8) addressable RGB LEDs that are po…
MIKROE CODEGRIP for STM32 is a fast USB-C and WiFi programmer and hardware debugger that supports STM32 Cortex M0, M3, M4, an…
This holder allows you to safely secure a IOIO development board and a self-adhesive breadboard in place to easily run jumper…
The SmartiPi Touch 2 is a case for the Official Raspberry Pi Display, Raspberry Pi and Raspberry Pi camera.
The Flash 6 Click based on W25Q128JV (128M-bit) flash memory from Winbond provides a storage solution for systems with limite…
The MicroMod Main Board is a specialized carrier board that allows you to interface a MicroMod Processor Board with a single …
The PowerPal is a breadboard-friendly 3A power supply module that allows you to select from four different output voltage le…
The MicroMod Main Board is a specialized carrier board that allows you to interface a MicroMod Processor Board with up to two…
The 8BitDo SN30 Pro Bluetooth Gamepad is the worlds first, fully featured retro controller.
MIKROE FTDI Click features FT2232H - dual high speed USB 2.0 to UART/I2C/SPI serial interface converter.
The yellow 8BitDo Lite Bluetooth Gamepad is an ultra-portable controller made for 2D games & more.
The blue 8BitDo Lite Bluetooth Gamepad is an ultra-portable controller made for 2D games & more.
The BeagleBone Black is a great credit-card-sized development platform with a fast growing community, why would you not want …
EXPAND 5 Click features a low-voltage 24-bit I2C and SMBus I/O expander.
TIMI-130 is a 1.3” TFT IPS LCD display module that is driven directly by a PIXXI-28 graphics processor from 4D Labs.
The BBC micro:bit is a pocket-sized computer that lets you get creative with digital technology.
The SparkFun Top pHAT is the fundamental machine learning add-on for Raspberry Pi or any 2x20 GPIO SBC!
The Raspberry Pi is THE new favorite of development platforms, so the last thing that you’d want is for something bad to ha…
The SparkFun Tinker Kit (STK) is a great way to get started with programming and hardware interaction with the Arduino progra…
The Sense HAT is an add-on board for Raspberry Pi with an 8×8 RGB LED matrix, a five-button joystick and a number of sensors…
The RS485 5 Click is a Click board™ equipped with the MAX485, low-power, slew-rate-limited transceiver for RS-485 and RS-42…
MIKROE SolidSwitch Click is a compact add-on board that contains load switch devices.
The pi-topPROTO is a HAT-compatible add-on board for prototyping electronics for your pi-top or pi-topCEED. With plenty of sp…
The gator:starter ProtoSnap has been designed to provide you with a staring point to go beyond the capabilities of the SparkF…
Tynker and BBC Learning take coding to the next level with a programmable HiFive mini-computer and guided lessons covering Bl…
Single Wire CAN Click is a compact add-on board that contains an IC for a single wire data link capable of operating with var…
MIKROE PROTO Click is an accessory board in mikroBUS™ form factor. It features 10x11 prototyping area as well as additional…
The IQaudio Codec Zero delivers bi-directional digital audio signals between Raspberry Pi Zero and its onboard Dialog Semicon…
The MicroMod Thing Plus brings the ability to use the MicroMod ecosystem with the popular Feather footprint.
Comparator Click, carrying the LM2903 IC, has two independent precision voltage comparators.
MIKROE Secure Click carries the ATECC508A cryptographic coprocessor with secure hardware-based key storage.
Engineering Just Got Cool with the Arduino Engineering Kit! Bring the power of the Arduino MKR1000 to the classroom with MATL…
This blue, anodised aluminium case for the Raspberry Pi 4 will give you 10-15°C of passive cooling under a full CPU load.
The Raspberry Pi 3 B+ Starter Kit is a great way to gain a solid introduction to the small, credit-card-sized computer.
The SparkX ATECC608A Cryptographic Co-processor Breakout allows you to add strong security to your IoT node, edge device, or …
The micro:bit is a pocket-sized computer and the Go Bundle provides you with everything you need to get hooked up and powered…
With WiFi, BLE and cellular LTE–CAT M1/NB1, the GPy is a Pycom triple–bearer MicroPython enabled micro controller.
The Teensy 3.5 is larger, faster and capable of more projects, especially with its onboard micro SD card port and pre-soldere…
The Raspberry Pi Zero W can be a bit tricky to set up with its unique power and cable requirements. That's where this kit com…
EEPROM 7 Click is a compact add-on board that contains the highest-density memory solution.
The gator:color ProtoSnap is perfect if you want to add a low-profile glowing component to your project.
RiBUS Click is an adapter Click board™ that allows a mikroBUS™ to interface with RiBUS compatible display modules.
BlackBoard went red! This version of the BlackBoard can now be purchased [here](https://www.sparkfun.com/products/18158). …
This LoRa Gateway has 8 channels, 15km line of sight range, & comes assembled with everything necessary for easy deployment i…
The CAN FD 4 Click is a Click board™ that features the NCV7344D10R2G, a Controller Area Network (CAN) transceiver, from ON …
The Teensy 3.6 is larger, faster and capable of more complex projects, especially with its onboard micro SD card port, ARM Co…
Combining the micro:bit with the SparkFun moto:bit carrier board creates a flexible, low-cost, Qwiic-enabled robotics platfor…
The Tessel 2 is a development board with on-board WiFi capabilities that allows you to build scripts in Node.js. This Tessel …
