micro:bit Go Bundle

The micro:bit is a pocket-sized computer that lets you get creative with digital technology. You can code, customize and control your micro:bit from anywhere! Use your micro:bit for all sorts of unique creations, from robots to musical instruments and more. At half the size of a credit card, this board is equipped with a surprising amount of hardware, including 25 red LED lights that can flash messages. There are two programmable buttons that can be used to control games or pause and skip songs on a playlist. The micro:bit can even detect motion and tell you which direction you’re heading. It can also use Bluetooth Low Energy (BLE) to interact with other devices and the internet.

This micro:bit Go Bundle provides you with everything you need to get hooked up and powered. This kit includes the micro:bit, a short USB cable, a AAA battery holder and AAA batteries. Also inside the Go Bundle you will find a Quick Start Guide with four unique ideas to get you started with micro:bit! The Go Bundle is a quick and economical way to get started with the micro:bit.

On the front of the board you will find the 5x5 LED array, which you can use as a light sensor; a tiny screen to draw on or display words, numbers and other information; and the two programmable buttons! On the back of the board you will find the brains of the micro:bit, a 16MHz, 32-bit ARM Cortex-M0 microcontroller with 256KB Flash, 16KB RAM and a built-in temperature sensor. Additionally, the back of the micro:bit is populated by an accelerometer, compass and Bluetooth Smart antenna, as well as a microUSB and two-pin JST connector for different power options. Finally, at the bottom of the board you will find 20 gold-tabbed edge pins and five ring connectors (three for digital/analog I/O, two for power and ground) for hooking up external components. The tabs with larger holes can be easily used with alligator clips to prototype added components quickly.

The micro:bit has even supplied an intuitive mobile app that lets you send your code to your micro:bit over Bluetooth (without using a USB cable). With this app you will be able to interact with your micro:bit on a higher level of accessibility.

NOte: If you are looking to buy the micro:bit Go Bundle is larger quantities, we do offer it in packs of 10 at a reduced price with the micro:bit Club Kit. Make sure to check that kit out instead to save today!

  • 1x micro:bit Board
  • 1x micro USB Cable --- 6in
  • 1x Battery Holder --- 2xAAA
  • 2x AAA Batteries
  • 32-bit ARM Cortex-M0 CPU
  • 256KB Flash
  • 16KB RAM
  • 5x5 Red LED Array
  • Two Programmable Buttons
  • Onboard Light, Compass, Accelerometer and Temp Sensors
  • BLE Smart Antenna
  • Three Digital/Analog Input/Output Rings
  • Two Power Rings --- 3V and GND
  • 20-pin Edge Connector
  • MicroUSB Connector
  • JST-PH Battery Connector (Not JST-XH)
  • Reset Button with Status LED

micro:bit Go Bundle Product Help and Resources

Getting Started with the micro:bit

September 2, 2021

The BBC micro:bit is a compact, powerful programming tool that requires no software installation. Read on to learn how to use it YOUR way!

How to Load MicroPython on a Microcontroller Board

September 4, 2018

This tutorial will show you how to load the MicroPython interpreter onto a variety of development boards.

Wireless Remote Control with micro:bit

January 21, 2019

In this tutorial, we will utilize the MakeCode radio blocks to have the one micro:bit transmit a signal to a receiving micro:bit on the same channel. Eventually, we will control a micro:bot wirelessly using parts from the arcade:kit!

Core Skill: Programming

If a board needs code or communicates somehow, you're going to need to know how to program or interface with it. The programming skill is all about communication and code.

2 Programming

Skill Level: Rookie - You will need a better fundamental understand of what code is, and how it works. You will be using beginner-level software and development tools like Arduino. You will be dealing directly with code, but numerous examples and libraries are available. Sensors or shields will communicate with serial or TTL.
See all skill levels


Core Skill: Electrical Prototyping

If it requires power, you need to know how much, what all the pins do, and how to hook it up. You may need to reference datasheets, schematics, and know the ins and outs of electronics.

2 Electrical Prototyping

Skill Level: Rookie - You may be required to know a bit more about the component, such as orientation, or how to hook it up, in addition to power requirements. You will need to understand polarized components.
See all skill levels


Comments

Looking for answers to technical questions?

We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.

  • tetsujin / about 7 years ago / 2

    It would have been nice if the battery pack had a power switch... There's no power switch for this thing.

  • suntop / about 6 years ago / 1

    What I did to power my Micro:bit :

    Option 1: Added a 1N4007 diode in series with LiPo Battery (+ switch ) for days long powering

    Option 2: Soldered a 4cm X 6cm Protoboard with male-header pins (slight bending is required to align) beneath the Micro:bit PCB to protect the sensors and added a CR2032 battery holder on the other side of that protoboard for portable power. It's breadboard friendly now with all the SPI, I2C, ADC and some GPIO connections ( excluding the pins which are tied to the LED matrix display)

    Additional Info : Current draw @ 3V : 7-8 mA when display active, 1-2 mA when not

Customer Reviews

4.5 out of 5

Based on 18 ratings:

Currently viewing all customer reviews.

2 of 2 found this helpful:

Easy to program

It was easy to program right out of the box using the graphic programming system (I'm reluctant to call it a language) supplied. I just had it do some different graphics, dependent on which button was pushed, through the 5x5 LED array. It was super easy. Can't say much more, since I had no purpose for it. It won't replace my Arduinos right away, if ever, but I can see how it can be a lot of fun!

1 of 1 found this helpful:

Lots of ways to Program, Bluetooth is kind of a failure !

Coding is possible in so many ways - block editor, micro python, js, mbed, Arduino and probably in professional IDEs like Keil, IAR too.

https://www.microbit.co.uk/app/

https://developer.mbed.org/platforms/Microbit/

By the way, these are actually priced twice because of "Buy One, Give One" campaign from BBC. Which means you are helping some kid out there to walk the path of becoming a nerd !

Update: The BLE seems buggy, worked once but failed with some GATT Error. If you have plans to work with Bluetooth buy two or more of these, don't expect this to work flawlessly with smartphones Bluetooth 4.0 . Not much app support on Google play either.

Update 2: BLE works better when programmed with MBED OS. nrf51822 codes are compatible with slight modification.

1 of 1 found this helpful:

Good product.

Which Is better microbit or sparkfun thing?. Too happy with this board. Thanks sparkfun.

1 of 1 found this helpful:

Lots of Possibilities

Many ways to code. A switch on the battery would make it better.

1 of 1 found this helpful:

If you are going to get the 'bit, might as well get the bundle

So, as far as the bundle goes, it's a cheap add on that makes perfect sense. Not sure why you'd order a board without these accessories unless you already have them. One thing I will say; the assertion that you can't use a LiPo battery without adding a voltage regulator seems to be false. I've been running mine straight on a LiPo battery for weeks sitting on my desk and it works just fine (using a 500mah battery). Doesn't get hot or do anything strange, hasn't burned up yet.

As far as the Micro:Bit as a product, I have mixed feelings. It's so cheap, and it's pretty cool, but I can't imagine kids actually playing with this for more than a few weeks before they get bored and move on to something else. If you're already using Arduino or the Raspberry Pi, the bit won't be anything new, it'll be a fun novelty, and maybe a way to practice with MicroPython if you don't have another board to try it on. The memory is VERY limited though, so getting a Feather Huzzah might make more sense. The mobile app sucks out loud, not even worth trying to use. The pairing generally seems really flaky and unreliable.

1 of 1 found this helpful:

A microbit with a battery box and a usb cable. A switch would be handy..

I'm not a developer, just playing around with some simple projects and using these as a microcontroller, but I love the micro:bit - I know it is for educational purposes, but this is a great price for a Cortex M0 development board that already has some input/output devices included. The couple of extra bucks for the battery box/connector is worth it in some cases. If you want to tinker around with some projects but don't have a lot of spare buttons, sensors, or a simple display laying around, this seems to be one of the cheaper/easier ways to get into the hobby.

The only change I would make to this package, even if it increased the price by a dollar or so: Since the battery box has the connector integrated to it, as mentioned in other reviews it would be nicer if there was a simple on/off switch inline somewhere. I think most people using this probably don't leave the battery box hooked up powering the microbit all the time and end up cutting the wires to add a switch anyway once integrated to a project.

Very fun

My 10 year old took right off with this starter kit. Quality is good, and can't beat the price. Thanks.

Great value

The micro:bit from SparkFun is a great value. It did take over 8 weeks from order to delivery - but it was clear in the information provided that the item was backordered. I just didn't expect quite this long of a wait. I'm happy that SparkFun is a US distributor. I also purchase the clear MI:pro Case for micro:bit - at $4.95 - it's a smart addition. I do wish that SparkFun could become a US distributor for Fizzbits - another product from the UK.

Lots of fun!

Right out of the box you can start learning and having fun. The online programming tools for graphical programming, java script, and micro-python work easily and have great tutorials with them.

Nice device with great potential for education

Easy to use and program thanks to Microsoft MakeBlock. Even Scratch will support this device. I found a minor problem while dragging & dropping a program onto the microbit: I always get an error message like if I was trying to unmount the device, however, the program copies Ok though the error is disturbing. I tried with different USB cables so it's not a matter of the cable. This happens under MacOSX. I haven't tried it yet under Windows nor GNU/Linux. The USB cable would be longer in order to facilitate some operations like shaking the Micro:bit. Would be good to have a hardware button to toggle the device on/off, or at least a software visible at first sight. The blinking LEDs may make you feel that the device is consuming a lot of energy so between one program to another you want the program to stop.

Excellent .. I prepare sample tutorials... Use them as gifts

I hope they are useful in learning a broad collection of applications. Simple radio connections may help my nephews and nieces learn Computer applications involving multiple machines .

Product GREAT! Communication NOT GREAT

Everything works awesome. The problem was that it was backordered with little communication from the company. We ordered these to include in the cost a workshop we were providing. I was contacted once with an offer to buy a more expensive kit at a slight discount to get it sooner but, when I explained the situation, heard nothing. The kits arrived a week after the workshop.

Microbits rock. The Go Bundle is the best return on $18 you can get

I work for a school, and am a dad and tinkerer. These Microbits are awesome because you can start making right out of the box. Coding with the makecode is a piece of cake - and kids get to create things they care about.

My 14 and 11 year old daughter's first embedded system

This is the best embedded system for kids. The scratch architecture is super easy for 1st timers.

Great package at great price.

I can't really say much specifically about my latest purchase. I had reclaimed one from one bot to another bot, so the previous bot was suffering "Tin Woodsman Syndrome". I haven't got around to testing it, but so far so good; it can no longer claim it has no brain. (maybe I'll make it play that song). More useful to future buyers, I'd like to say there had been a long drought where no one seemed to have micro:bits at all and I checked for months on Amazon and other online electronic parts stores. All online stores got new shipments at roughly the same time, but Sparkfun had the best prices for both this Bundle and lone boards. Perhaps there are Chinese sites now, but with long shipping times and inability to return products, why waste time with them? Sparkfun came through on price as well as quality control, etc. I'm sure if I do find something off, even if its user error, I can get help at Sparkfun, and that deserves a good review.

Microbit

On time! My students love them!

Great introduction to programming

I used these for a professional development session with teachers at our school. By the end of the one hour workshop the math teachers were excited to be integrating programming and the microbit into their curriculum. The kit is great because you get the USB cable and batteries included; no need for additional purchases.